Effect of surface severe plastic deformation on microstructure and hardness of Al alloy sheet with enhanced precipitation

被引：7
|
作者：
Zhang, Hai [1 ]
He, Zhiyan [1 ]
Gao, Wenbin [2 ]
机构：
[1] Civil Aviat Univ China, Coll Aeronaut Engn, Tianjin 300300, Peoples R China
[2] Jiangsu Univ Sci & Technol, Dept Mat Sci & Engn, Zhenjiang 212000, Peoples R China
来源：
MATERIALS LETTERS | 2023年 / 333卷
基金：
中国国家自然科学基金;
关键词：
Severe plastic deformation; Aluminum alloy; Precipitated phase; Sheet; Hardness; BEHAVIOR; PHASE;
D O I：
10.1016/j.matlet.2022.133632
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effect of severe plastic deformation on microstructure and hardness of 7075 aluminum alloy sheet presented different results from that of thick samples in previous study. Grains were not refined obviously, and precipitation phases MgZn2 were massively dissolved in the matrix in the region close to the surface. Varied density of dislocations were produced at different depths. The depth of severe plastic deformation layer was 40-70 mu m, while the affected depth of hardness was much deeper. The maximum hardness enhancement, 16% increase compared to the core hardness, appeared at about 150-250 mu m below surface. The hardness change depended on the competition between the roles of precipitation dissolution and dislocation multiplication.
引用
收藏
页数：4
相关论文
共 50 条
  • [31] Evaluation of hardness and precipitation in Zn-modified Al2024 alloy after plastic deformation and heat treatments
    Garay-Reyes, C. G.
    Gonzalez-Rodelas, L.
    Cuadros-Lugo, E.
    Martinez-Franco, E.
    Aguilar-Santillan, J.
    Estrada-Guel, I.
    Maldonado-Orozco, M. C.
    Martinez-Sanchez, R.
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 705 : 1 - 8
  • [32] Role of plastic deformation in tailoring ultrafine microstructure in nanotwinned diamond for enhanced hardness
    Hu, Wentao
    Wen, Bin
    Huang, Quan
    Xiao, Jianwei
    Yu, Dongli
    Wang, Yanbin
    Zhao, Zhisheng
    He, Julong
    Liu, Zhongyuan
    Xu, Bo
    Tian, Yongjun
    [J]. SCIENCE CHINA-MATERIALS, 2017, 60 (02) : 178 - 185
  • [33] Enhanced grain refinement due to deformation-induced precipitation during ambient-temperature severe plastic deformation of an Al-7%Si alloy
    Garcia-Infanta, J. M.
    Swaminathan, S.
    Cepeda-Jimenez, C. M.
    McNelley, T. R.
    Ruano, O. A.
    Carreno, F.
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 478 (1-2) : 139 - 143
  • [34] Microstructure and tensile behavior of Fe-16Al-based alloy after severe plastic deformation
    Bystrzycki, Jerzy
    Fraczkiewicz, Anna
    Lyszkowski, Radoslaw
    Mondon, Marilyne
    Pakiela, Zbigniew
    [J]. INTERMETALLICS, 2010, 18 (07) : 1338 - 1343
  • [35] Effect of Severe Plastic Deformation and Subsequent Silicon Spheroidizing Treatment on the Microstructure and Mechanical Properties of an Al-Si-Mg Alloy
    Haghdadi, Nima
    Zarei-Hanzaki, Abbas
    Kawasaki, Megumi
    Phillion, Andre B.
    Hodgson, Peter D.
    [J]. ADVANCED ENGINEERING MATERIALS, 2017, 19 (07)
  • [36] How does surface integrity of nanostructured surfaces induced by severe plastic deformation influence fatigue behaviors of Al alloys with enhanced precipitation?
    Maurel, Pierre
    Weiss, Laurent
    Grosdidier, Thierry
    Bocher, Philippe
    [J]. INTERNATIONAL JOURNAL OF FATIGUE, 2020, 140 (140)
  • [37] Precipitation microstructure of ultrafine-grained Al-Zn-Mg alloys processed by severe plastic deformation
    Gubicza, J.
    Schiller, I.
    Chinh, N. Q.
    Illy, J.
    [J]. MATERIALS SCIENCE, TESTING AND INFORMATICS III, 2007, 537-538 : 169 - 176
  • [38] On the effect of plastic deformation on the coarsening of theta-phase precipitation in an Al-Cu alloy
    Cerri, E
    Evangelista, E
    Ryum, N
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1997, 28 (02): : 257 - 263
  • [39] THE HARDNESS ANALYSIS OF THE IF STEEL SHEET AFTER A PLASTIC DEFORMATION
    Mihalikova, Maria
    Ambrisko, L'ubomir
    Pesek, Ladislav
    [J]. CHEMICKE LISTY, 2010, 104 : S350 - S352
  • [40] Interrogation of the microstructure and residual stress of a nickel-base alloy subjected to surface severe plastic deformation
    Ortiz, A. L.
    Tian, J. W.
    Villegas, J. C.
    Shaw, L. L.
    Liaw, P. K.
    [J]. ACTA MATERIALIA, 2008, 56 (03) : 413 - 426
12345