Spherical activated carbons derived from resin-microspheres for the adsorption of acetic acid

Separation of small-molecule carboxylic acids, especially acetic acid, from wastewater is challenging due to its high-water solubility, acidity, and low concentration. In this work, resin-derived spherical activated carbon (RSAC) was directly prepared from resin spheres through facile pre-oxidation and carbonization processes. RSAC was characterized by SEM, N2 physisorption, XRD, Raman, element analysis and XPS. RSAC showed high removal rates (> 95.8 %) for a variety of small-molecule carboxylic acids. The initial adsorption capacity of acetic acid over RSAC was 23.4 mg/g and 94 % of the removal rate was retained after five successive adsorptiondesorption cycles for 1000 mg/L acetic acid. In addition, RSAC showed a high total organic carbon removal rate (> 80 %) for the high-salinity effluent of catalytic wet air oxidation (CWAO) process. The adsorption of acetic acid over RSAC complied with the pseudo-second-order model and Langmuir model ideally, through Vander Waals force and pore-filling effect. Furtherly, discarded resin microspheres were used to prepare spherical active carbon, which showed 88.2 % removal of acetic acid (1000 mg/L). The benign scheme of "treating wastes by wastes" from economical and environmental aspects was realized.