Experimental investigation of additively manufactured high-temperature heat exchangers

被引：1

作者：

Fuchs, Marco ^{[1
]}

Bodemer, Julian ^{[1
]}

Kabelac, Stephan ^{[1
]}

机构：

[1] Leibniz Univ Hannover, Inst Thermodynam, Univ 1, D-30823 Hannover, Germany

来源：

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER | 2024年 / 218卷

关键词：

Additive manufacturing; Heat exchanger; High temperature; Heat transfer coefficients; Friction; -factors; Experimental; DESIGN; STATE; FINS;

D O I：

10.1016/j.ijheatmasstransfer.2023.124774

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

This article examines various additively manufactured heat exchangers for high-temperature applications. The heat exchangers differ in terms of their internal fin structure as well as optimizations in terms of manufacturing quality. Starting from a reference fin type, optimizations with focus on low pressure drop and high heat transfer are performed. The heat exchangers are investigated experimentally, focusing on the laminar flow regime between 60

引用

页数：19

共 50 条

[41] CHARACTERISTIC FEATURES OF MATHEMATIC MODELING HIGH-TEMPERATURE HEAT EXCHANGERS
Tsygankov, M. P.
Kruchinin, D. S.
[J]. IZVESTIYA VYSSHIKH UCHEBNYKH ZAVEDENII KHIMIYA I KHIMICHESKAYA TEKHNOLOGIYA, 2013, 56 (03): : 95 - +
[42] CONSIDERATIONS IN DESIGNING HIGH-TEMPERATURE DUMP HEAT-EXCHANGERS
BASTOW, DC
SEBER, EC
[J]. MECHANICAL ENGINEERING, 1977, 99 (01): : 112 - 112
[43] Design and Experimental Investigation of an Additively Manufactured PMSM Rotor
Urbanek, Stefan
Frey, Pauline
Magerkohl, Sebastian
Zimmer, Detmar
Tasche, Lennart
Schaper, Mirko
Ponick, Bernd
[J]. 2021 IEEE INTERNATIONAL ELECTRIC MACHINES & DRIVES CONFERENCE (IEMDC), 2021,
[44] Effect of pore geometry on properties of high-temperature oxidized additively manufactured magnesium scaffolds
Chaoxin Wang
Shuyuan Min
Jinge Liu
Bingchuan Liu
Bo Peng
Caimei Wang
Xiaolin Ma
Peng Wen
Yufeng Zheng
Yun Tian
[J]. Journal of Magnesium and Alloys, 2024, 12 (11) : 4509 - 4520
[45] Additively Manufactured NiTi and NiTiHf Alloys: Estimating Service Life in High-Temperature Oxidation
Dabbaghi, Hediyeh
Safaei, Keyvan
Nematollahi, Mohammadreza
Bayati, Parisa
Elahinia, Mohammad
[J]. MATERIALS, 2020, 13 (09)
[46] VERY HIGH-TEMPERATURE DESIGN CRITERIA FOR NUCLEAR HEAT-EXCHANGERS IN ADVANCED HIGH-TEMPERATURE REACTORS
NICKEL, H
SCHUBERT, F
SCHUSTER, H
[J]. NUCLEAR ENGINEERING AND DESIGN, 1986, 94 (03) : 337 - 343
[47] Effect of pore geometry on properties of high-temperature oxidized additively manufactured magnesium scaffolds
Wang, Chaoxin
Min, Shuyuan
Liu, Jinge
Liu, Bingchuan
Peng, Bo
Wang, Caimei
Ma, Xiaolin
Wen, Peng
Zheng, Yufeng
Tian, Yun
[J]. Journal of Magnesium and Alloys, 2024, 12 (11): : 4509 - 4520
[48] Calculation Approach for Ceramic Heat Pipe Heat Exchangers for High-Temperature Applications
Unz, Simon
Hack, Nina
Beckmann, Michael
[J]. CHEMBIOENG REVIEWS, 2018, 5 (04): : 270 - 280
[49] Experimental characterization of heat transfer in an additively manufactured polymer heat exchanger
Arie, Martinus A.
Shooshtari, Amir H.
Tiwari, Ratnesh
Dessiatoun, Serguei V.
Ohadi, Michael M.
Pearce, Joshua M.
[J]. APPLIED THERMAL ENGINEERING, 2017, 113 : 575 - 584
[50] High-temperature oxidatiOn behavior of laser-aided additively manufactured NiCrAlY coating
Ansari, M.
Shoja-Razavi, R.
Barekat, M.
Man, H. C.
[J]. CORROSION SCIENCE, 2017, 118 : 168 - 177

← 1 2 3 4 5 →