In-situ dynamic monitoring of phase transformation in steels using a multi-frequency electromagnetic sensor

被引:3
|
作者
Zhou, L. [1 ]
Jacobs, W. [2 ]
Wu, F. [1 ]
Jolfaei, M. [1 ]
Davis, C. L. [1 ]
机构
[1] Univ Warwick, WMG, Coventry CV4 7AL, England
[2] Primetals Technol Ltd, Christchurch BH23 6EW, England
基金
英国工程与自然科学研究理事会;
关键词
Dynamic transformation measurement; Steel microstructure; EM sensors; Relative magnetic permeability; FE modelling; PEARLITIC STEELS; STAINLESS-STEEL; MICROSTRUCTURE; PERMEABILITY; FRACTION; BEHAVIOR;
D O I
10.1016/j.ndteint.2023.102918
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
An industrial-scale electromagnetic (EM) sensor is employed to non-destructively and dynamically monitor the microstructural phase transformation for mild steel samples with different thicknesses (3 mm, 6 mm, and 10 mm), high carbon steel (0.76 wt% C) and 2.25Cr-1Mo steel plates. The continuous cooling process of these samples in ambient air (cooling rate of 0.99-7.53 degrees C/s) on a run-out table is examined. To determine the phase fractions based on the EM sensor signal and measured temperature, a finite element (FE) model for the EM sensor is utilised. The obtained phase fractions are further validated by conducting dilatometry measurements inde-pendently, confirming the accuracy of the transformation behaviour and phase fraction determination derived from the EM sensor readings.
引用
收藏
页数:8
相关论文
共 50 条
  • [31] Chip Health Tracking Using Dynamic In-Situ Delay Monitoring
    Balef, Hadi Ahmadi
    Goossens, Kees
    de Gyvez, Jose Pineda
    2019 DESIGN, AUTOMATION & TEST IN EUROPE CONFERENCE & EXHIBITION (DATE), 2019, : 304 - 307
  • [32] Multi-frequency dynamic absorber for improved spacecraft comfort during the launch phase
    Mastroddi F.
    Facchini G.
    Gaudenzi P.
    CEAS Space Journal, 2012, 3 (3-4) : 77 - 88
  • [33] Dynamic impedance spectroscopy using dynamic multi-frequency analysis: A theoretical and experimental investigation
    Koster, Dominique
    Du, Guoqing
    Battistel, Alberto
    La Mantia, Fabio
    ELECTROCHIMICA ACTA, 2017, 246 : 553 - 563
  • [34] Dynamic monitoring technique of bored pile pouring process based on multi-frequency ultrasound
    Houcheng Liu
    Wenlian Liu
    Sugang Sui
    Hanhua Xu
    Jinchao Wang
    Journal of Civil Structural Health Monitoring, 2022, 12 : 411 - 425
  • [35] Dynamic monitoring technique of bored pile pouring process based on multi-frequency ultrasound
    Liu, Houcheng
    Liu, Wenlian
    Sui, Sugang
    Xu, Hanhua
    Wang, Jinchao
    JOURNAL OF CIVIL STRUCTURAL HEALTH MONITORING, 2022, 12 (02) : 411 - 425
  • [36] Efficient Multi-frequency Phase Unwrapping Using Kernel Density Estimation
    Lawin, Felix Jaremo
    Forssen, Per-Erik
    Ovren, Hannes
    COMPUTER VISION - ECCV 2016, PT IV, 2016, 9908 : 170 - 185
  • [37] REGISTRATION OF MULTI-FREQUENCY SAR IMAGERY USING PHASE CORRELATION METHODS
    Peterson, E. H.
    Fotopoulos, G.
    Schmitt, A.
    Zee, R. E.
    Roth, A.
    2011 IEEE INTERNATIONAL GEOSCIENCE AND REMOTE SENSING SYMPOSIUM (IGARSS), 2011, : 3708 - 3711
  • [38] In-situ Low Concentration Monitoring of Ammonia Using an Optical Fibre Sensor
    Dooly, G.
    Manap, H.
    O'Keeffe, S.
    Lewis, E.
    2011 IEEE SENSORS, 2011, : 242 - 245
  • [39] In-situ analysis of solid state phase transformation in TRIP-aided steels by synchrotron diffraction
    Brauser S.
    Kromm A.
    Kannengiesser T.
    Rethmeier M.
    Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, 2011, 29 (03): : 81s - 85s
  • [40] Multi-frequency electromagnetic scattering from inhomogeneous rectangular waveguides using shifted frequency internal equivalence
    Koksal, A
    JOURNAL OF ELECTROMAGNETIC WAVES AND APPLICATIONS, 1998, 12 (09) : 1241 - 1255