Microstructure, Mechanical Property, and Wear Behavior of NiAl-Based High-Entropy Alloy

Based on the excellent comprehensive mechanical properties of high-entropy alloy (HEA), the NiAl-based HEA was designed to achieve excellent high-temperature strength, toughness, and wear resistance. In this work, vacuum arc melting technology was used to prepare (NiA1)78(CoCrFe)16.5Cu5.5 HEA, and its microstructure, phase composition, and mechanical properties were systematically studied. The results showed that (NiA1)78(CoCrFe)16.5Cu5.5 HEA was composed of FCC and BCC/B2, with a spinodal decomposition structure in the matrix, and nano-precipitation in the interdendritic, exhibiting a good high-temperature performance. At 600 degrees C, the compressive fracture strength is 842.5 MPa and the fracture strain is 24.5%. When the temperature reaches 800 degrees C, even if the strain reaches 50%, the alloy will not fracture, and the stress-strain curve shows typical work hardening and softening characteristics. The wear coefficient of the alloy first increases and then decreases with the increase in temperature in the range of room temperature to 400 degrees C. However, the specific wear rate shows the opposite trend. At 100 degrees C, the wear rate reaches the lowest of 7.05 x 10-5 mm3/Nm, and the wear mechanism is mainly abrasive wear.