Evaluation of dried blood spots as an alternative sampling strategy for 5-fluorouracil monitoring: From method development to clinical application

Therapeutic drug monitoring (TDM) of 5-Fluorouracil (5-FU) is strongly recommended because of its large interindividual pharmacokinetic variability, narrow therapeutic window, and incidence of toxicity. However, there are several factors that limit the application of TDM in clinical settings. Considering the intrinsic advantages of dried microsamples, such as minimally invasive sampling, analyte stability, and cost-effective logistics, this study aimed to develop a method for the determination of 5-FU in dried blood spots (DBS) using ultra-high liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) and to evaluate its clinical application. Sample preparation was based on an aqueous extraction followed by protein precipitation. Separation was performed in an Acquity UPLC (R) HSS C18 (150 x2.1 mm, 1.8 mu m), and the mobile phases were water and acetonitrile with 0.5% acetic acid. The total run time was 5.5 min. The method was linear from 100 to 2000 ng/mL, precise (maximum CV% of 7.5%), and accurate (98.3-115.4%). The average recovery was 70%. Blood hematocrit had a minimal impact on the assay. DBS samples were stable for 21 days at 4, 25, and 45 degrees C. A total of 40 paired samples of plasma, capillary DBS, and venous DBS were analyzed. Median 5-FU concentrations were 444.7, 637.0, and 499.7 ng/mL for plasma, capillary DBS, and venous DBS, respectively. Capillary and plasma concentrations were significantly correlated (r > 0.90), but there was a lack of agreement between the methods, as capillary DBS levels were on average 146% of plasma. Venous DBS corresponded to 110% of the measured plasma concentrations, with a strong correlation (r > 0.97) and agreement between the methods. Our study is the first to report the use of DBS samples to quantify 5-FU. Further studies are needed to establish whether capillary samples can replace plasma.