On the equivalent flexural and shear moduli of laminated beams: Definition and determination by bending tests

被引：3

作者：

Mujika, Faustino ^{[1
]}

Olave, Mireia ^{[2
]}

Cantera, M. Asuncion ^{[1
]}

Garitaonaindia, Ugutz ^{[1
]}

Isasa, Miren ^{[1
]}

Arrese, Ainhoa ^{[1
]}

机构：

[1] Univ Basque Country UPV EHU, Dept Mech Engn, Mech Mat Grp, Bizkaia, Spain

[2] Ikerlan Technol Res Ctr, Basque Res & Technol Alliance BRTA, P JM Arizmendiarrieta 2, Arrasate Mondragon 20500, Spain

来源：

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING | 2023年 / 175卷

关键词：

A. Hybrid composites; B. Sandwich material; C. Equivalent modulus; D Laminated beam; TRANSVERSE-SHEAR; FREE-VIBRATION; COMPOSITE; SANDWICH; DEFORMATION; 3-POINT; PLATES;

D O I：

10.1016/j.compositesa.2023.107802

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Equivalent flexural and shear moduli of laminated beams of rectangular cross-section made of orthotropic layers are defined by an analytical approach. Equivalent flexural and shear modulus are defined as those that would correspond to a homogenous beam. In order to check the suitability of the moduli defined, three-point bending tests varying the span are carried out in a sandwich material and in hybrid laminates. In the case of the sandwich material, it is shown that a three-point bending test could be considered a shear test from the stiffness point of view. In the case of hybrid materials, virtual tests are carried out by the Finite Element Method. The agreement between equivalent moduli obtained from the analytical approach and the bending tests has been checked, being quite good in all cases. Finally, the effect of dimension uncertainty in three-point bending tests is analyzed by a Monte Carlo simulation.

引用

页数：14

共 50 条

[21] Experimental tests and FEM model for SFRC beams under flexural and shear loads
Colajanni, Piero
La Mendola, Lidia
Priolo, Salvatore
Spinella, Nino
2008 SEISMIC ENGINEERING CONFERENCE COMMEMORATING THE 1908 MESSINA AND REGGIO CALABRIA EARTHQUAKE, PTS 1 AND 2, 2008, 1020 : 872 - +
[22] Transverse shear and normal deformation theory for bending analysis of laminated and sandwich elastic beams
Zenkour, AM
MECHANICS OF COMPOSITE MATERIALS AND STRUCTURES, 1999, 6 (03): : 267 - 283
[23] Bending Shear Tests on R/C-Beams with Post-Installed Shear Reinforcement
Randl, Norbert
Kunz, Jakob
BETON- UND STAHLBETONBAU, 2009, 104 (11) : 728 - 736
[24] Experimental and theoretical similitude analysis for flexural bending of scaled-down laminated I-beams
Asl, M. E.
Niezrecki, C.
Sherwood, J.
Avitabile, P.
COMPOSITE STRUCTURES, 2017, 176 : 812 - 822
[25] On the difference between flexural moduli obtained by three-point and four-point bending tests
Mujika, F
POLYMER TESTING, 2006, 25 (02) : 214 - 220
[26] Young's and shear moduli of glued laminated timber composed of different species obtained by a flexural vibration test
Kubojima, Yoshitaka
Tonosaki, Mario
HOLZFORSCHUNG, 2012, 66 (07) : 871 - 875
[27] Determination of the shear modulus of polymers and laminated materials with the method of anticlastic plate bending
Farshad, Mehdi
Flüeler, Peter
Materialpruefung/Materials Testing, 1999, 41 (03): : 64 - 69
[28] Numerical assessment of the analytical models used to determine flexural and shear moduli in I-Beams when the tensile and compressive moduli are different
Insausti, N.
Adarraga, I
Carbajal, N.
Mujika, F.
POLYMER TESTING, 2020, 81
[29] Determination of Young's modulus and shear modulus by means of deflection curves for wood beams obtained in static, bending tests
Murata, Koji
Kanazawa, Tsubasa
HOLZFORSCHUNG, 2007, 61 (05) : 589 - 594
[30] EFFECT OF STRETCHING BENDING COUPLING AND SHEAR DEFORMATIONS ON POST-BUCKLING BEHAVIOR OF LAMINATED BEAMS
ADAN, M
SHEINMAN, I
COMPUTERS & STRUCTURES, 1988, 30 (03) : 609 - 613

← 1 2 3 4 5 →