Selective extraction of aromatics from residual oil with subcritical water

Based on theoretical calculations and experimental characterizations, the extraction of heavy oil components using subcritical water (Sub-CW) as an extraction solvent was studied in the temperature range of 250-325( degrees)C. According to theoretical calculations, small-scale polycyclic aromatic hydrocarbons (PAHs) are preferentially dissolved in Sub-CW. Meanwhile, the dissolution of heavy oil molecules with large-scale aromatic structures and heterocyclic rings in Sub-CW is hindered. The increase in temperature reduces the hydrogen bonding force between water molecules and the van der Waals repulsion between Sub-CW and PAHs, promoting the dissolution of PAHs in Sub-CW. Extraction experiments applied in a semi-continuous device confirm that Sub-CW selectively extracts aromatic hydrocarbons from heavy oil. Increasing extraction temperature increases the yield of the extract. The aromatic hydrocarbon content in the extract at 325 C reaches 80 wt%, which is 27 wt% higher than feedstock value. In addition, the asphaltene content in the extract is reduced from the feedstock value of 14 wt% to 2 wt%.