Phase transition of sulfur during continuous impact loading-unloading process

被引:0
|
作者
Yang, Lei [1 ]
Liu, Qi-Jun [1 ]
Yang, Xue [1 ]
Liu, Fu-Sheng [1 ]
机构
[1] Southwest Jiaotong Univ, Sch Phys Sci & Technol, Bond & Band Engn Grp, Chengdu 610031, Peoples R China
关键词
Sulfur; Raman spectra; Amorphization; HIGH-PRESSURE; RAMAN;
D O I
10.1016/j.jpcs.2023.111552
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
Raman spectra of sulfur at a rapid unloading rate were obtained through a continuous impact loading-unloading process. In the process, we find that the values of the relative area ratios Av1, v2/Av3 (v1 is the peak at 156 cm-1, v2 at 217 cm-1 and v3 at 475 cm-1) are discontinuous with increasing pressure. The breakpoint is around 1.41 GPa, showing that a phase transition is likely to occur around this pressure. At the same time, when the pressure is higher to 5.45 GPa, the amortization of sulfur was detected, accompanied by a spectrum with the light absorption characteristic. This phenomenon is thought to be a unique amorphization phenomenon under impact loading.
引用
收藏
页数:5
相关论文
共 50 条
  • [21] Study on the thermal effects of rubbers during loading-unloading cycles by infrared thermography
    Wang, Meng
    Liao, Yun
    Chen, Dajun
    POLYMER BULLETIN, 2013, 70 (01) : 171 - 180
  • [22] Case study: Hazard assessment of ethylene and LNG loading-unloading process in cirebon port
    Devianto, Hary
    Eviani, Mitra
    Nurdin, Isdiriayani
    Widiatmoko, Pramujo
    EUROCORR 2017 - The Annual Congress of the European Federation of Corrosion, 20th International Corrosion Congress and Process Safety Congress 2017, 2017,
  • [23] 3D particle flow simulation of loading-unloading failure process of marble
    Cong Yi
    Cong Yu
    Zhang Li-ming
    Jia Le-xin
    Wang Zai-quan
    ROCK AND SOIL MECHANICS, 2019, 40 (03) : 1179 - +
  • [24] Investigation of Loading-Unloading Curve and Stress Distribution of Thin Hard Coating by Finite Element Analysis during Nanoindentation Process
    Yang Tung-Sheng
    Chang Sheng-Yi
    Deng Ji-Hong
    4TH MECHANICAL AND MANUFACTURING ENGINEERING, PTS 1 AND 2, 2014, 465-466 : 1365 - 1369
  • [25] Effect of Loading-Unloading Cycles on Impact-Damaged Jute/Glass Hybrid Laminates
    De Rosa, Igor Maria
    Santulli, Carlo
    Sarasini, Fabrizio
    Valente, Marco
    POLYMER COMPOSITES, 2009, 30 (12) : 1879 - 1887
  • [26] An analytical description of the mechanical hysteresis of entangled materials during loading-unloading in uniaxial compression
    Bouaziz, O.
    Masse, J. P.
    Brechet, Y.
    SCRIPTA MATERIALIA, 2011, 64 (02) : 107 - 109
  • [27] Numerical study of inelastic behavior of magnesium alloy sheets during cyclic loading-unloading
    Wang, Huamiao
    Li, Dayong
    Peng, Yinghong
    Wu, P. D.
    NUMISHEET 2018: 11TH INTERNATIONAL CONFERENCE AND WORKSHOP ON NUMERICAL SIMULATION OF 3D SHEET METAL FORMING PROCESSES, 2018, 1063
  • [28] P-Wave Velocity and Energy Evolution Process of Concrete in Uniaxial Loading-Unloading Tests
    Liu, Zelin
    Ma, Chunde
    Wei, Xin'ao
    JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 2021, 33 (06)
  • [29] PLASTIC MATERIALS WITH CONTINUOUS TRANSITION BETWEEN LOADING AND UNLOADING STATES
    TOKUOKA, T
    ARCHIVES OF MECHANICS, 1982, 34 (02): : 187 - 197
  • [30] Influence of the loading rate of force on the formation of deformation twins in martensitic stainless steel under repetitive loading-unloading process
    Wei, Yudao
    Liao, Hengcheng
    Huo, Shihui
    INTERNATIONAL JOURNAL OF FATIGUE, 2023, 166