Analysis of Microstructural Parameters of a Layer Clad from Fe - C - Si - Mn - Cr - Ni - Mo - V Powder Wire

被引：0
|
作者：
Polevoi, E. V. [1 ]
Kozyrev, N. A. [2 ]
Mikhno, A. R. [2 ]
Usol'tsev, A. A. [2 ]
Komarov, A. A. [2 ]
机构：
[1] EVRAZ West Siberian Integrated Iron & Steel Works, Novokuznetsk, Russia
[2] Siberian State Ind Univ, Novokuznetsk, Russia
来源：
METAL SCIENCE AND HEAT TREATMENT | 2023年 / 64卷 / 11-12期
关键词：
cladding; powder wire; microalloying; microstructure; interlamellar distance; fraction of pearlite; chemical composition;
D O I：
10.1007/s11041-023-00874-6
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Microstructural parameters of clad metal from Fe - C - Si - Mn - Cr - Ni - Mo - Vpowder wire with an addition containing carbon and fluorine cleaning dust of aluminum production instead of amorphous carbon are determined. The chemical composition and the microstructural parameters including the grain diameter, the interlamellar distance, the type of the structure of the deposited layer and its chemical composition are determined.
引用
收藏
页码：693 / 696
页数：4
相关论文
共 50 条
  • [21] Microstructural Evaluation on Shape Recovery in Stainless Fe-Mn-Si-Cr-Ni-Co SMA Processed by Wire Drawing
    Andrade, Elaine Cristina
    Bernardi, Heide Heloise
    Otubo, Jorge
    MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2014, 17 (03): : 583 - 587
  • [22] Structure and Composition of the Arc Sprayed Coatings Formed Using a Flux Cored Wire of the Fe-C-Si-Mn-Cr-Ni-Mo System
    Kozyrev, N. A.
    Usol'tsev, A. A.
    Polevoi, E., V
    Gusev, A., I
    Mikhno, A. R.
    RUSSIAN METALLURGY, 2022, 2022 (05): : 541 - 545
  • [23] Study of the properties of flux cored wire of Fe-C-Si-Mn-Cr-Mo-Ni-V-Co system for the strengthening of nodes and parts of equipment used in the mineral mining
    Gusev, A. I.
    Kozyrev, N. A.
    Usoltsev, A. A.
    Kryukov, R. E.
    Osetkovsky, I. V.
    INTERNATIONAL SCIENTIFIC AND RESEARCH CONFERENCE ON KNOWLEDGE-BASED TECHNOLOGIES IN DEVELOPMENT AND UTILIZATION OF MINERAL RESOURCES (KTDMUR2017), 2017, 84
  • [24] LATTICE-PARAMETERS OF CEMENTITE IN FE-C-CR, FE-C-MN, FE-C-MO, AND FE-C-NI ALLOYS
    KAGAWA, A
    OKAMOTO, T
    TRANSACTIONS OF THE JAPAN INSTITUTE OF METALS, 1979, 20 (11): : 659 - 666
  • [25] POWDER-FORGED ROLLER BEARING RACES FROM FE-NI-MO AND FE-MN-CR POWDERS
    SALAK, A
    BENKE, V
    POWDER METALLURGY INTERNATIONAL, 1990, 22 (05): : 9 - +
  • [26] Influence of Mo in the structure of rapidly solidified Fe-Mo-Cr-Mn-Si-C alloy
    Ranganathan, S.
    Makaya, A.
    Fredriksson, H.
    INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, 2009, 22 (1-4) : 264 - 267
  • [27] Rapid solidification behavior of Fe-Cr-Mn-Mo-Si-C alloys
    Ranganathan, Sathees
    Makaya, Advenit
    Fredriksson, Hasse
    Savage, Steven
    METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2007, 38 (06): : 917 - 926
  • [28] Rapid Solidification Behavior of Fe-Cr-Mn-Mo-Si-C Alloys
    Sathees Ranganathan
    Advenit Makaya
    Hasse Fredriksson
    Steven Savage
    Metallurgical and Materials Transactions B, 2007, 38 : 917 - 926
  • [29] GIBBS ENERGY OF SOLID-SOLUTIONS OF C, CR, MN, MO AND NI IN FE
    HILLERT, M
    WALDENSTROM, M
    SCANDINAVIAN JOURNAL OF METALLURGY, 1977, 6 (05) : 211 - 218
  • [30] The connection analysis between the dilution of the deposited Fe-Cr-V-Mo-C layer by the basic metal and the parameters of its microstructure
    Degterev, A. S.
    Gnusov, S. F.
    INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING, AUTOMATION AND CONTROL SYSTEMS 2016, 2017, 177
12345