Investigation of Alkali-Activated Slag-Based Composite Incorporating Dehydrated Cement Powder and Red Mud

被引:27
|
作者
Abadel, Aref A. [1 ]
Alghamdi, Hussam [1 ]
Alharbi, Yousef R. [1 ]
Alamri, Mohammed [1 ]
Khawaji, Mohammad [1 ]
Abdulaziz, Mohammed A. M. [1 ]
Nehdi, Moncef L. [2 ]
机构
[1] King Saud Univ, Coll Engn, Dept Civil Engn, Riyadh 11421, Saudi Arabia
[2] McMaster Univ, Dept Civil Engn, Hamilton, ON L8S 4M6, Canada
关键词
slag; geopolymer; compressive strength; microstructure; curing; dehydrated cement powder; ASH GEOPOLYMER CONCRETE; FLY-ASH; MECHANICAL-PROPERTIES; PORE STRUCTURE; PART I; STRENGTH; MICROSTRUCTURE; METAKAOLIN; PERFORMANCE; SHRINKAGE;
D O I
10.3390/ma16041551
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
Recycled construction cementitious materials (RCCM) and red mud (RM) could be considered a type of discarded material with potential cementitious properties. Generally, landfilling and stacking are utilized to dispose of this type of solid waste, which can be detrimental to the environment and sustainability of the construction sector. Accordingly, a productive process for making eco-efficient alkali-activated slag-based samples with the inclusion of RCCM and red mud is studied in this paper. Dehydrated cement powder (DCP) is attained through the high-temperature treatment of RCCM, and red mud can be obtained from the alumina industry. Subsequently, DCP and RM are utilized as a partial substitute for granulated blast furnace slag (GBFS) in alkali-activated mixtures. Two different batches were designed; the first batch had only DCP at a dosage of 15%, 30%, 45%, and 60% as a partial substitute for GBFS, and the second batch had both DCP and RM at 15%, 30%, 45%, and 60% as a partial substitute for GBFS. Different strength and durability characteristics were assessed. The findings show that when both dehydrated cement powder and red mud are utilized in high quantities, the strength and durability of the specimens were enhanced, with compressive strength improving by 42.2% at 28 days. Such improvement was obtained when 7.5% each of DCP and RM were added. The results revealed that DCP and RM have a negative effect on workability, whilst they had a positive impact on the drying shrinkage as well as the mechanical strength. X-ray diffraction and micro-structural analysis showed that when the amount of DCP and RM is increased, a smaller number of reactive products forms, and the microstructure was denser than in the case of the samples made with DCP alone. It was also confirmed that when DCP and RM are used at optimized dosages, they can be a potential sustainable binder substitute; thus, valorizing wastes and inhibiting their negative environmental footprint.
引用
收藏
页数:22
相关论文
共 50 条
  • [21] Bond performance of corroded rebars in sustainable alkali-activated slag-based concrete incorporating steel fibers
    Li, Qi
    Ren, Zhigang
    Su, Xin
    Li, Peipeng
    JOURNAL OF BUILDING ENGINEERING, 2024, 85
  • [22] Development of sustainable slag-based alkali-activated concrete incorporating fly ash at ambient curing conditions
    Pradhan, Shashwati Soumya
    Mishra, Umesh
    Biswal, Sushant Kumar
    Jangra, Parveen
    ENERGY ECOLOGY AND ENVIRONMENT, 2024, 9 (05) : 563 - 577
  • [23] On the action mechanism of lignosulfonate plasticizer in alkali-activated slag-based system
    Kalina, Lukas
    Bflek, Vlastimil, Jr.
    Hruby, Petr
    Iliushchenko, Valeriia
    Kalina, Michal
    Smilek, Jiri
    CEMENT AND CONCRETE RESEARCH, 2022, 157
  • [24] Preparation of Low Carbon Silicomanganese Slag-Based Alkali-Activated Materials Using Alkali-Activated Silica Waste
    Zheng, Yang
    Zhang, Zhi-Yuan
    Liu, Yisong
    Zhang, Xiaozhu
    Kang, Shaoguo
    Lv, Leyang
    Zhou, Junbo
    BUILDINGS, 2024, 14 (12)
  • [25] Influence of environmental stresses on the durability of slag-based alkali-activated cement crusts for wind erosion control
    Komaei, Alireza
    Soroush, Abbas
    Fattahi, Seyed Mohammad
    Ghanbari, Hesam
    SCIENCE OF THE TOTAL ENVIRONMENT, 2023, 902
  • [26] Investigation of the hydrothermally altered K-feldspar use in slag-based alkali-activated binders
    Carvalho, Ivo C.
    Rosa, Bruna
    Krauczuk, Caroline
    Dembogurski, Maria E.
    de Oliveira, Gabrielli T.
    Kirchheim, Ana P.
    CASE STUDIES IN CONSTRUCTION MATERIALS, 2025, 22
  • [27] Preparation and Characterization of Alkali-activated Lithium Slag-based Artificial Aggregates
    Dong B.
    Luo X.
    Tian K.
    Hong S.
    Wang Y.
    Cailiao Daobao/Materials Reports, 2021, 35 (15): : 15011 - 15016
  • [28] Micromechanical Properties of Alkali-Activated Slag-Based Paste Explored by Nanoindentation
    Chuang Y.-C.
    Chou Y.-T.
    Chen C.-T.
    Chen H.-A.
    Journal of the Chinese Institute of Civil and Hydraulic Engineering, 2022, 34 (05): : 435 - 440
  • [29] Microstructure of Alkali-activated Granulated Blast Furnace Slag-based Geopolymer
    Zhang, Yao Jun
    Li, Hai Hong
    Zhao, Yong Lin
    Wang, Ya Chao
    Xu, De Long
    ADVANCED BUILDING MATERIALS, PTS 1-4, 2011, 250-253 (1-4): : 528 - +
  • [30] Hydration products of alkali-activated slag-red mud cementitious material
    Pan, ZH
    Cheng, L
    Lu, YN
    Yang, NR
    CEMENT AND CONCRETE RESEARCH, 2002, 32 (03) : 357 - 362