Effect of Heat-Treatment Conditions on the Microstructure and the Static Fracture Toughness of an α + β VT23 Titanium Alloy

被引：1
|
作者：
Gladkovskii, S. V. [1 ]
Veselova, V. E. [1 ]
Vichuzhanin, D. I. [1 ]
Zichenkov, M. Ch. [2 ]
Dubinskii, S. V. [2 ]
Kovalev, N. I. [2 ]
Kulemin, A. V. [2 ]
Kovalev, I. E. [2 ]
机构：
[1] Russian Acad Sci, Gorkunov Inst Engn Sci, Ural Branch, Ekaterinburg 620049, Russia
[2] Cent Aerohydrodynam Inst, Zhukovskii 140180, Moscow Oblast, Russia
来源：
RUSSIAN METALLURGY | 2023年 / 2023卷 / 04期
关键词：
two-phase titanium alloy; quenching; aging; metastable beta phase; martensitic transformation; mechanical properties; static fracture toughness; microstructure of fracture surface;
D O I：
10.1134/S0036029523040092
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The mechanical properties and microstructure of an alpha + beta VT23 titanium alloy are studied after quenching under various conditions and strengthening aging. Aging at 500 degrees C for 8 h is shown to decrease the static fracture toughness (SFT) of the alloy quenched from 800 or 860 degrees C by a factor of 1.4 and 2.4, respectively. The highest set of strength properties and static fracture toughness (sigma(0.2) = 1130 MPa, sigma(u) = 1252 MPa, K-1c = 39.2 MPa m(1/2)) at a retained sufficient structural strength reserve T = 44.4 x 10(3) MPa2 m(1/2) is achieved after quenching from 800 degrees C and subsequent aging at 500 degrees C for 8 h. The regularities of the evolution of the phase composition and the structure of the alloy as a function of heat-treatment conditions are found. The peculiarities of the macro- and microstructure of the fracture surfaces of compact ST specimens after static fracture toughness tests are revealed.
引用
收藏
页码：425 / 432
页数：8
相关论文
共 50 条
  • [31] Formation of Oxide Barrier Coatings Resistant to Hydrogen Penetration on a VT23 Titanium Alloy
    Shalin, A. V.
    Gvozdeva, O. N.
    Stepushin, A. S.
    Ruchina, N. V.
    Skoblin, A. A.
    RUSSIAN METALLURGY, 2023, 2023 (10): : 1417 - 1421
  • [32] THE STRENGTH OF WELDED-JOINTS IN VT23 ALLOY UNDER REPEATED STATIC LOADS
    TOPOLSKII, VF
    KISHKINA, SI
    STRONINA, LA
    KHOREV, AI
    MIKHALEV, YD
    LEONTEV, VY
    AUTOMATIC WELDING USSR, 1983, 36 (07): : 39 - 41
  • [33] HEAT-TREATMENT, MICROSTRUCTURE AND FRACTURE TOUGHNESS RELATIONSHIPS IN TI-6A1-4V ALLOY
    LEWIS, RE
    CROSSLEY, FA
    JOM-JOURNAL OF METALS, 1976, 28 (12): : A26 - A26
  • [34] GRAIN-STRUCTURE OF WELDED-JOINTS IN TITANIUM-ALLOY VT23
    BABAREKO, AA
    EGIZ, IV
    KHOREV, MA
    RUSSIAN METALLURGY, 1987, (01): : 97 - 102
  • [35] PROPERTIES OF WELDED JOINTS IN VT23 TITANIUM ALLOY OF VARIOUS PHASE COMPOSITIONS.
    Guseva, E.A.
    Rodionov, V.L.
    Welding Production (English translation of Svarochnoe Proizvodstvo), 1985, 32 (09): : 39 - 42
  • [36] PHASE-COMPOSITION AND ELASTIC-MODULI OF THE TITANIUM-ALLOY VT23
    LYASOTSKAYA, VS
    FEDOTOV, SG
    KNYAZEVA, SI
    DMITRIEV, AA
    METAL SCIENCE AND HEAT TREATMENT, 1993, 35 (3-4) : 242 - 246
  • [37] Formation of Oxide Barrier Coatings Resistant to Hydrogen Penetration on a VT23 Titanium Alloy
    A. V. Shalin
    O. N. Gvozdeva
    A. S. Stepushin
    N. V. Ruchina
    A. A. Skoblin
    Russian Metallurgy (Metally), 2023, 2023 : 1417 - 1421
  • [38] THE OPTIMIZATION OF THE HEAT-TREATMENT CONDITIONS FOR WELDED THIN SHEET STRUCTURES MADE FROM THE ALLOY VT-23
    KHOREV, MA
    SOVIET ENGINEERING RESEARCH, 1983, 3 (11): : 48 - 51
  • [39] STUDY OF TEXTURE FORMATION MECHANISM IN HIGH STRIPE OF VT23 TITANIUM-ALLOY
    BABAREKO, AA
    EGIZ, IV
    KHOREV, AI
    FEDULOV, VN
    FIZIKA METALLOV I METALLOVEDENIE, 1987, 63 (03): : 538 - 542
  • [40] EFFECT OF SUPPLEMENTARY ALLOYING OF TITANIUM-ALLOY VT23 ON ITS PHASE-COMPOSITION AND TENDENCY TO RECRYSTALLIZATION
    BABAREKO, AA
    EGIZ, IV
    KHOREV, MA
    METAL SCIENCE AND HEAT TREATMENT, 1993, 35 (1-2) : 116 - 120
12345