Nonlinear Bending and Buckling of Oblate Ellipsoidal Shells with Variable Thickness Under External Pressure and Temperature Change

被引:1
|
作者
Moiseeva, V. E. [1 ]
Skvortsova, Z. V. [1 ]
机构
[1] Russian Acad Sci, Kazan Sci Ctr, Inst Mech & Engn, Kazan 420111, Russia
关键词
oblate ellipsoidal shell; uniform strength; variable thickness; bending; temperature stresses; limit load; STABILITY;
D O I
10.1134/S1995080223050414
中图分类号
O1 [数学];
学科分类号
0701 ; 070101 ;
摘要
The effect of low and high temperatures on the nonlinear axisymmetric strain in oblate semi-ellipsoidal shells of variable thickness with a fully clamped base under the action of an external uniform pressure is numerically studied. The relations of the theory of Timoshenko type shells are used, taking into account the geometric and material nonlinearities. The problem is solved by a combination of successive approximations and orthogonal sweeping. The dependence of material characteristics on temperature is taken into account. The variable thickness is determined by the equal strength condition for the membrane ' s stress-strain state. It is shown that the limit loads of the considered shells of variable thickness in a wide range of temperature changes noticeably increase in comparison with the limit loads of shells of constant thickness in a similar volume. In this case, the greatest critical loads for all considered shells are observed at cryogenic temperatures, and at elevated temperatures, their values decrease significantly.
引用
收藏
页码:1744 / 1751
页数:8
相关论文
共 50 条
  • [21] On buckling of toroidal shells under external pressure
    Blachut, J
    Jaiswal, OR
    COMPUTERS & STRUCTURES, 2000, 77 (03) : 233 - 251
  • [22] EXPERIMENTAL INVESTIGATION INTO THE BUCKLING OF CYLINDRICAL-SHELLS OF VARIABLE-WALL THICKNESS UNDER RADIAL EXTERNAL-PRESSURE
    MALIK, Z
    MORTON, J
    RUIZ, C
    EXPERIMENTAL MECHANICS, 1979, 19 (03) : 87 - 92
  • [23] Analytical study on the buckling of cylindrical shells with stepwise variable thickness subjected to uniform external pressure
    Zhou, Fan
    Chen, Zhiping
    Fan, Haigui
    Huang, Song
    MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, 2016, 23 (10) : 1207 - 1215
  • [24] Buckling analyses of cylindrical shells with axial variable elastic modulus under external pressure
    Licai Yang
    Shanglin Zhang
    Tian Qiu
    Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2024, 46
  • [25] Buckling analyses of cylindrical shells with axial variable elastic modulus under external pressure
    Yang, Licai
    Zhang, Shanglin
    Qiu, Tian
    JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2024, 46 (03)
  • [26] BUCKLING OF CORRODED TORISPHERICAL SHELLS UNDER EXTERNAL PRESSURE
    Blachut, J.
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2018, VOL 3B, 2019,
  • [27] BUCKLING OF CLAMPED CONICAL SHELLS UNDER EXTERNAL PRESSURE
    SINGER, J
    AIAA JOURNAL, 1966, 4 (02) : 328 - &
  • [28] BUCKLING OF ORTHOTROPIC CONICAL SHELLS UNDER EXTERNAL PRESSURE
    SINGER, J
    FERSHTSC.R
    AERONAUTICAL QUARTERLY, 1964, 15 (02): : 151 - &
  • [29] Analytical Study on the Buckling of Cylindrical Shells With Circumferential Thickness Variation Under Varying External Pressure
    Yang, Licai
    JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 2024, 146 (04):
  • [30] BUCKLING OF CLAD PIPES UNDER BENDING AND EXTERNAL PRESSURE
    Vasilikis, Daniel
    Karamanos, Spyros A.
    OMAE2011: PROCEEDINGS OF THE ASME 30TH INTERNATIONAL CONFERENCE ON OCEAN, OFFSHORE AND ARCTIC ENGINEERING, VOL 4: PIPELINE AND RISER TECHNOLOGY, 2011, : 469 - 478