Impact damage imaging for composite structures using guided wave techniques with 3D digital image correlation

被引:0
|
作者
Abbott, T. Bryce [1 ,2 ]
Yuan, Fuh-Gwo [1 ,2 ]
机构
[1] Natl Inst Aerosp, Integrated Syst Hlth Management Lab, Hampton, VA 23666 USA
[2] North Carolina State Univ, Dept Mech & Aerosp Engn, Raleigh, NC 27695 USA
关键词
digital image correlation (DIC); barely visible impact damage (BVID); guided wave; monogenic signal; Riesz transform; damage imaging; total wave energy imaging criterion; structural health monitoring;
D O I
10.1117/12.2659161
中图分类号
V [航空、航天];
学科分类号
08 ; 0825 ;
摘要
This paper presents an integrated system capable of damage imaging of barely visible impact damage (BVID) in composite structures. This system applies guided-wave-based structural health monitoring using 3D digital image correlation, or GWSHM-3D DIC to produce a map of subsurface damage using a short video from a stereo pair of synchronized digital cameras. The proposed system overcomes many limitations of previous efforts of GWSHM that used 2D digital image correlation (DIC). First, 3D DIC can capture the higher-amplitude out-of-plane displacements associated with the anti-symmetric wave mode, lowering the spatial resolution requirements of the cameras. Second, a total wave energy (TWE) imaging condition is employed that uses the monogenic signal via a Reisz transform to obtain the local instantaneous amplitude as a contribution to wave energy. This condition can highlight local resonance in the damage region without the need for high frame rates to fully reconstruct the wavefield. With significantly lowered spatial and temporal resolution requirements of the cameras, high-stiffness materials like composites can be inspected or monitored with a larger field-of-view (FOV). Additionally, signal enhancement techniques intended to increase the effective resolution of the camera are no longer necessary, which reduces the data acquisition time from many hours to a few seconds. To demonstrate this integrated dual-camera concept with the TWE imaging condition, the system was used to image damage in a CFRP composite sandwich panel that had been subjected to a low-velocity impact. Initial damage maps produced for a 100-mm x 100-mm FOV using a three-second video pair show precise damage imaging ability that is comparable to benchmark ultrasonic and x-ray scans. This efficient and reliable integrated system demonstrated high potential for in-time damage inspection on composite aircraft and other critical structures.
引用
收藏
页数:11
相关论文
共 50 条
  • [41] 3D Digital Image Correlation Applied to Birdstrike Tests
    Barriere, L.
    Cherrier, O.
    Passieux, J. -C.
    Bouquet, M.
    Ferrero, J. -F.
    INTERNATIONAL DIGITAL IMAGING CORRELATION SOCIETY, 2017, : 17 - 20
  • [42] Digital image correlation measures 3D surface deformation
    Bridges, Andrew
    Tofts, Alistair
    LASER FOCUS WORLD, 2012, 48 (09): : 55 - 58
  • [43] 3D robust digital image correlation for vibration measurement
    Chen, Zhong
    Zhang, Xianmin
    Fatikow, Sergej
    APPLIED OPTICS, 2016, 55 (07) : 1641 - 1648
  • [44] 3D digital image correlation evaluation of arthrodesis implants
    Shen, Victor ChuYu
    Bumgardner, Clifton H.
    Actis, Lisa
    Ritz, Joseph
    Park, Joseph
    Li, Xiaodong
    CLINICAL BIOMECHANICS, 2020, 71 : 29 - 36
  • [45] Analysis of Wave-Induced Current Using Digital Image Correlation Techniques
    Shin, Bumshick
    Kim, KyuHan
    JOURNAL OF SENSORS, 2018, 2018
  • [46] ANALYSIS OF TUBE EXPANSION USING 3D DIGITAL IMAGE CORRELATION AND NUMERICAL MODELING
    Abbassi, Fethi
    Ahmad, Furqan
    Karrech, Ali
    Islam, Md. Saiful
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2019, VOL 9, 2020,
  • [47] SUSTAINABLE DEVELOPMENT OF PRESSURE EQUIPMENT USING 3D DIGITAL IMAGE CORRELATION METHOD
    Popovic, Dejana
    Mitrovic, Nenad
    Petrovic, Aleksandar
    Milosevic, Milos
    Momcilovic, Nikola
    CHEMICAL INDUSTRY & CHEMICAL ENGINEERING QUARTERLY, 2020, 26 (03) : 287 - 293
  • [48] Dynamic characteristics of a wind turbine blade using 3D digital image correlation
    Baqersad, Javad
    Carr, Jennifer
    Lundstrom, Troy
    Niezrecki, Christopher
    Avitabile, Peter
    Slattery, Micheal
    HEALTH MONITORING OF STRUCTURAL AND BIOLOGICAL SYSTEMS 2012, 2012, 8348
  • [49] Characterization of Biocompatible Materials Using Stereo Microscope 3D Digital Image Correlation
    Rusin, Tomasz
    Kopernik, Magdalena
    ADVANCED ENGINEERING MATERIALS, 2016, 18 (09) : 1651 - 1660
  • [50] IDENTIFICATION OF FAILURE MECHANISMS IN CFRP LAMINATES USING 3D DIGITAL IMAGE CORRELATION
    Schorer, Nora
    Sause, Markus G. R.
    20TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS, 2015,