Simultaneous Assessment of Wettability and Water Saturation Through Integration of 2D NMR and Electrical Resistivity Measurements

Nuclear magnetic resonance (NMR) transverse relaxation (T2) measurements are sensitive to fluid saturations and wettability of the rocks. However, quantifying wettability index solely from NMR T2 models relies on accurate estimates of water saturation. It has been shown that integrating resistivity measurements and NMR T2 distributions enables simultaneous assessment of wettability and water saturation. Nevertheless, there still exist significant uncertainties in this approach in the presence of multiple types of fluids with overlapping trans-verse relaxation times or multimodal pore -size distribution. Thus, the objectives of this paper are (a) to introduce a new multiphysics workflow integrating 2D NMR with resistivity measurements to simultaneously quantify wettability index and water/hydrocarbon satu-ration and (b) to verify the reliability of the introduced workflow with core measurements in different rock types.The workflow starts by using 2D diffusivity-transverse relaxation (D-T2) or longitudinal-transverse relaxation (T1 -T2) measurements to estimate fluid saturations. We use a nonlinear inversion algorithm to fit a multimodal Gaussian distribution to the 2D NMR measurements. We then calculate water and hydrocarbon saturations using the fluid volumes estimated from the multimodal Gaussian distribution. This estimate of water/hydrocarbon saturation is an input to our new physics- based resistivity model that explicitly incorporates the influence of wettability. The inputs to the resistivity model include water saturation, resistivity index, and pore- geometry-related parameters. In the core- scale verification step, we compare the results of wettability and fluid saturations obtained from the new workflow with gravimetri-cally assessed water saturation and Amott index measurements on core sample.We successfully verified the reliability of the new workflow with experimental measurements. Estimated water saturation using the introduced workflow resulted in an average relative error of less than 7% compared to the gravimetrically assessed water saturations. Wettability indices obtained from the workflow were in agreement with those estimated using Amott indices. The average absolute error between the estimated wettability indices and the Amott indices was 0.27. In conclusion, results demonstrated that integration of 2D NMR and electrical resistivity measurements enables reliable and simultaneous assessment of wettability and water saturation in different rock types. The method introduced in this paper is promising for reliable and real -time wettability assessment, both in the laboratory and in -situ condition. It provides a physics- based and robust method to accurately and simultaneously estimate water/hydrocarbon saturation and wettability in hydrocarbon-bearing rocks.