Dam safety assessment using 2D electrical resistivity geophysical survey and geological mapping

A combination of Geological mapping and two-dimensional electrical resistivity (2D-ER) surveys was applied to study the Unilorin Dam and its environment. The purpose of the study was to investigate the dam for structural anomalies that may compromise the purpose and safety of the dam. Field equipment for the study comprised a SuperSting R8/IP Multi-Electrodes Resistivity Meter, 84 metallic electrodes and the accessories, compass clinometer, and portable GPS equipment. Geological data were processed and plotted to obtain a Geological Map and Rosette Diagram that were used for structural interpretations. The structures interpreted include an asymmetric fold and a strike-slip fault. The 2D resistivity data were processed and tomographically inverted to obtain the resistivity models of the subsurface around the dam. Interpretations of 2D resistivity models showed that the dam reservoir floor is underlain by competent basement rocks, however, the basement rock is weathered in some places. Patches of low resistivities structures interpreted as seepages, fractures and water-saturated cavity were delineated in different sections of the dam. The surface structural elements from geological study support the subsurface structures interpreted in the 2D resistivity models. Weathered structures, fractures, and seepage in the reservoir floor constitute areas of excessive water loss in the dam. The cavity delineated in the dam foundation is a potential threat to the dams safety. The dam section with cavity has been referred to structural engineers for detailed study. (C) 2019 The Authors. Published by Elsevier B.V.