Friction and wear analysis of Al-5052/NiTi surface composites fabricated via friction stir processing

被引：12

作者：

Nabi, Shazman ^{[1
]}

Rathee, Sandeep ^{[1
]}

Srivastava, Manu ^{[2
]}

机构：

[1] Natl Inst Technol, Dept Mech Engn, Srinagar 190006, Jammu & Kashmir, India

[2] PDPM Indian Inst Informat Technol Design & Mfg, Dept Mech Engn, Jabalpur 482005, India

来源：

TRIBOLOGY INTERNATIONAL | 2024年 / 191卷

关键词：

Friction; Wear; Tribology; Metal Matrix Composites; Surface Composites; Friction Stir Processing; MECHANICAL-PROPERTIES; MICROSTRUCTURE; BEHAVIOR;

D O I：

10.1016/j.triboint.2023.109179

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

This work presents a comprehensive analysis of the wear behaviour of Al 5052 alloy reinforced with Nitinol (NiTip) shape memory alloy using friction stir processing (FSP). Multi-pass FSP was performed to improve the dispersion of NiTip in the base material. The reinforced NiTip significantly enhanced the wear resistance of the base material and led to a reduction in the coefficient of friction by 17% and 15% at 15 N and 25 N loads respectively, suggesting improved tribological properties. The corrosion resistance also showed a significant improvement in the four-pass FSPed specimen as compared to the base metal. The qualitative analysis of the study is in agreement with the quantitative results.

引用

页数：13

共 50 条

[41] Mechanical Properties of Al/Steel Composite Plates Fabricated via Friction Stir Processing
Ren, Facai
Li, Bo
Tang, Xiaoying
4TH INTERNATIONAL CONFERENCE ON APPLIED MATERIALS AND MANUFACTURING TECHNOLOGY, 2018, 423
[42] Defects analysis in friction stir processing of magnesium based surface composites
Nisar, Lubaid
Thoker, Aasif Nazir
Sanjum, Asma
Parray, Mohd Rafiq
Khan, Noor Zaman
Manroo, Suhail Ahmed
MATERIALS TODAY-PROCEEDINGS, 2022, 62 : 158 - 162
[43] Defects analysis in friction stir processing of magnesium based surface composites
Nisar, Lubaid
Thoker, Aasif Nazir
Sanjum, Asma
Parray, Mohd Rafiq
Khan, Noor Zaman
Manroo, Suhail Ahmed
MATERIALS TODAY-PROCEEDINGS, 2022, 62 : 158 - 162
[44] Microstructure Characterization of Al-TiC Surface Composite Fabricated by Friction Stir Processing
Shiva, Apireddi
Cheepu, Muralimohan
Kantumuchu, Venkata Charan
Kumar, K. Ravi
Venkateswarlu, D.
Srinivas, B.
Jerome, S.
INTERNATIONAL CONFERENCE ON RECENT ADVANCES IN MATERIALS, MECHANICAL AND CIVIL ENGINEERING, 2018, 330
[45] Influence of tool pin eccentricity on microstructural evolution and mechanical properties of friction stir processed Al-5052 alloy
Chen, Yu
Wang, He
Wang, Xiaoyu
Ding, Hua
Zhao, Jingwei
Zhang, Fenghe
Ren, Zhaohui
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 739 : 272 - 276
[46] A review on manufacturing the surface composites by friction stir processing
Bharti, Shalok
Ghetiya, Nilesh D.
Patel, Kaushik M.
MATERIALS AND MANUFACTURING PROCESSES, 2021, 36 (02) : 135 - 170
[47] Production of Surface Composites by Friction Stir Processing - A Review
Sudhakar, M.
Rao, Srinivasa C. H.
Saheb, Meera K.
MATERIALS TODAY-PROCEEDINGS, 2018, 5 (01) : 929 - 935
[48] Fabrication and wear characterization of an A413/Ni surface metal matrix composite fabricated via friction stir processing
Golmohammadi, M.
Atapour, M.
Ashrafi, A.
MATERIALS & DESIGN, 2015, 85 : 471 - 482
[49] Influences of Tool Pin Profile on Microstructure and Mechanical Properties of Al/Cu Composites Fabricated Via Friction Stir Processing
Mostafapour, Amir
Darani, Saeed Mahmoodi
Givi, Mohamad Kazem Besharati
Aghagol, Arash
MANUFACTURING SCIENCE AND TECHNOLOGY, PTS 1-8, 2012, 383-390 : 2753 - +
[50] Microstructure, mechanical and wear properties of AZ31/CoCrFeNi composites fabricated by friction stir processing
Wang, Wen
Fang, Yuan
Peng, Pai
Zhang, Zhi-Juan
Han, Peng
Zhang, Ting
Liu, Zhi-Hao
Guan, Xiao-Hu
Wang, Zhi
Qiao, Ke
Wang, Kuai-She
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2023, 33 (08) : 2328 - 2339

← 1 2 3 4 5 →