Influence of the temperature field on the formation of thermally foamed silicate materials based on industrial waste

被引：1

作者：

Yatsenko, Elena A. ^{[1
]}

Goltsman, Boris M. ^{[1
]}

Izvarin, Andrey I. ^{[1
]}

Kurdashov, Viktor M. ^{[1
]}

Chaudhary, Sandeep ^{[1
]}

Smoliy, Victoria A. ^{[1
]}

Ryabova, Anna V. ^{[1
]}

Klimova, Lyudmila V. ^{[1
]}

Vilbitskaya, Natalia A. ^{[1
]}

机构：

[1] Platov South Russian State Polytech Univ NPI, Novocherkassk 346428, Russia

来源：

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY | 2024年 / 149卷 / 06期

基金：

俄罗斯科学基金会;

关键词：

Porous silicate materials; Foaming; Ash-slag waste; Temperature field; Structure formation; FLY-ASH; GLASS FOAM; INSULATION; SLAG; CONDUCTIVITY; FABRICATION;

D O I：

10.1007/s10973-023-12845-3

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

The article studies the influence of the temperature field on the formation of foamed silicate materials based on different wastes, such as glass cullet and ash-slag waste. Calculations of the batch composition for the production of foamed materials were carried out. The samples were synthesized, and their physical properties were studied. It was discovered that the processes during heat treatment of porous silicate materials can be divided into two qualitatively different stages: a low-temperature heating until sintering and a high-temperature heating from sintering to melting. The effect of temperature field distribution on the dynamics of porous structure formation was described. The dependence of viscosity on temperature for different types of waste was studied. The temperatures at which the porous structure is formed were determined. The influence of foaming agent on foaming intensity was discussed. Practical conclusions on adjusting a temperature and raw materials' composition to obtain a uniform porous structure were made.

引用

页码：2537 / 2548

页数：12

共 50 条

[31] Preparation and dynamics of silicate based sintered materials using high content solid waste
Ma, Minglong
Yang, He
Liu, Shengnan
Zhou, Miao
Wang, Yuzheng
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2025,
[32] Characterization of hybrid silicate materials based on ceramic glazes and waste London underground dust
Ovcacikova, Hana
Miller, Jeffrey Stephen
Matejka, Vlastimil
Bartonickova, Eva
Jankovsky, Ondrej
Vlcek, Jozef
OPEN CERAMICS, 2024, 20
[33] Influence of raw material temperature on the properties of silicate-modified polyurethane grouting materials
Huang, Qinhao
Yuan, Chao
Li, Shuchen
Feng, Xianda
Zhou, Huiying
Han, Yong
Ye, Yuhang
CASE STUDIES IN CONSTRUCTION MATERIALS, 2024, 21
[34] Research of properties of modern construction materials based on industrial waste, waste wood and metallurgical industries
Abramov R.A.
Sokolov M.S.
Derevianko S.V.
Key Engineering Materials, 2019, 802 : 113 - 124
[35] Utilization of industrial waste materials for the preparation of wollastonite by temperature-induced forming technique
Abo-Almaged, H. H.
Ngida, Rehab E. A.
Ajiba, N. A.
Sadek, H. E. H.
Khattab, R. M.
SCIENTIFIC REPORTS, 2024, 14 (01):
[36] Formation of belite-based binder from waste materials
Kubatova, Dana
Zezulova, Anezka
Rybova, Alexandra
Bohac, Martin
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2020, 142 (05) : 1625 - 1633
[37] The influence of temperature on the formation of reducing materials rye flour saccharization
Pronin, S
BIOCHEMISCHE ZEITSCHRIFT, 1931, 240 : 94 - 97
[38] Formation of belite-based binder from waste materials
Dana Kubátová
Anežka Zezulová
Alexandra Rybová
Martin Boháč
Journal of Thermal Analysis and Calorimetry, 2020, 142 : 1625 - 1633
[39] Enhancing Density-Based Mining Waste Alkali-Activated Foamed Materials Incorporating Expanded Cork
Beghoura, Imed
Castro-Gomes, Joao
CIVILENG, 2021, 2 (02): : 523 - 540
[40] Polyurethane glycolysate from industrial waste recycling to develop low dielectric constant, thermally stable materials suitable for the electronics
Reghunadhan, Arunima
Datta, Janusz
Jaroszewski, Maciej
Kalarikkal, Nandakumar
Thomas, Sabu
ARABIAN JOURNAL OF CHEMISTRY, 2020, 13 (01) : 2110 - 2120

← 1 2 3 4 5 →