Experimental Analysis of the Static and Dynamic Behavior of 3D Printed Bio-Based Conventional and Auxetic Architectural Materials

被引:6
|
作者
Hamrouni, Anis [1 ,2 ]
Rebiere, Jean-Luc [1 ]
El Mahi, Abderrahim [1 ]
Beyaoui, Moez [2 ]
Haddar, Mohamed [2 ]
机构
[1] Le Mans Univ, Acoust Lab, LAUM, CNRS,UMR 6613, Ave O Messiaen, F-72085 Le Mans 9, France
[2] Natl Engn Sch Sfax, Dept Mech Engn, Lab Mech Modelling & Prod, Route Soukra, Sfax 3038, Tunisia
关键词
Damping; tensile; bio-based; composite; 3D printing; flax; PLA; auxetic; conventional; COMPOSITES; FIBER; FLAX; HONEYCOMBS;
D O I
10.1142/S1758825122500259
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
This paper presents the results of experimental analyses of the static and dynamic behavior of bio-sourced conventional and auxetic architectural materials. Three different configurations were studied. The specimens were made with the technology of additive manufacturing (3D printing) and were made of the same material which is polylactic acid reinforced with flax fibers (PFF). Several tensile tests were performed on four relative densities for each configuration of the composite to understand their influence on the static behavior of the material. Taking into account the insufficiency of the static tests to correctly predict the behavior of the composite, vibration tests were carried out on the same densities and composite configurations. The focus will be mainly on the study of the influence of the 2D lattice structures for each density on the evolution of the dynamic stiffness and damping properties.
引用
收藏
页数:22
相关论文
共 50 条
  • [41] Photocurable 3D printed anisotropic electrically conductive materials based on bio-renewable composites
    Mendes-Felipe, Cristian
    Cofano, Riccardo
    Garcia, Ander
    Sangermano, Marco
    Lanceros-Mendez, Senentxu
    ADDITIVE MANUFACTURING, 2023, 78
  • [42] Computational and experimental investigation of bio-inspired 3D printed prototypes
    Lozano, Christine M.
    Riveros, Guillermo A.
    Patel, Reena R.
    Wedgeworth, Dane N.
    McClelland, Zackery B.
    Goss, Robert C.
    Perkins, Edward
    BIOINSPIRATION, BIOMIMETICS, AND BIOREPLICATION X, 2020, 11374
  • [43] EXPERIMENTAL AND NUMERICAL INVESTIGATION OF SHORT-TERM BIO-DEGRADATION BEHAVIOR OF 3D PRINTED PLA
    Ilhan, Recep
    Senaysoy, Safa
    Lekesiz, Huseyin
    PROCEEDINGS OF ASME 2022 17TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE, MSEC2022, VOL 1, 2022,
  • [44] Study on the static and dynamic mechanical properties and constitutive models of 3D printed PLA and PLA-Cu materials
    Ji, Qing
    Wei, Jun
    Yi, Jianya
    Zhang, Long
    Ma, Jiajia
    Wang, Zhijun
    MATERIALS TODAY COMMUNICATIONS, 2024, 39
  • [45] Hygrothermal behavior of bio-based building materials including hysteresis effects: Experimental and numerical analyses
    Lelievre, D.
    Colinart, T.
    Glouannec, P.
    ENERGY AND BUILDINGS, 2014, 84 : 617 - 627
  • [46] A theoretical analysis of deformation behavior of an innovative 3D auxetic textile structure
    Ge, Zhaoyang
    Hu, Hong
    JOURNAL OF THE TEXTILE INSTITUTE, 2015, 106 (01) : 101 - 109
  • [47] Quasi-static and dynamic behavior analysis of 3D CFRP woven laminated composite auxetic structures for load-bearing and energy absorption applications
    Etemadi, Ehsan
    Zhang, Minglonghai
    Gholikord, Mohaddeseh
    Li, Keda
    Ho, Mabel Mei Po
    Hu, Hong
    COMPOSITE STRUCTURES, 2024, 340
  • [48] Three-Point Bending Behavior of Foam-Filled Conventional and Auxetic 3D-Printed Honeycombs
    Montazeri, Amin
    Bahmanpour, Ehsan
    Safarabadi, Majid
    ADVANCED ENGINEERING MATERIALS, 2023, 25 (17)
  • [49] Experimental investigation on the cracking behavior of 3D printed kinked fissure
    MA GuoWei
    DONG QianQian
    WANG Li
    Science China Technological Sciences, 2018, 61 (12) : 1872 - 1881
  • [50] Experimental investigation on the cracking behavior of 3D printed kinked fissure
    GuoWei Ma
    QianQian Dong
    Li Wang
    Science China Technological Sciences, 2018, 61 : 1872 - 1881