Experimental Analysis of the Static and Dynamic Behavior of 3D Printed Bio-Based Conventional and Auxetic Architectural Materials

被引:6
|
作者
Hamrouni, Anis [1 ,2 ]
Rebiere, Jean-Luc [1 ]
El Mahi, Abderrahim [1 ]
Beyaoui, Moez [2 ]
Haddar, Mohamed [2 ]
机构
[1] Le Mans Univ, Acoust Lab, LAUM, CNRS,UMR 6613, Ave O Messiaen, F-72085 Le Mans 9, France
[2] Natl Engn Sch Sfax, Dept Mech Engn, Lab Mech Modelling & Prod, Route Soukra, Sfax 3038, Tunisia
关键词
Damping; tensile; bio-based; composite; 3D printing; flax; PLA; auxetic; conventional; COMPOSITES; FIBER; FLAX; HONEYCOMBS;
D O I
10.1142/S1758825122500259
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
This paper presents the results of experimental analyses of the static and dynamic behavior of bio-sourced conventional and auxetic architectural materials. Three different configurations were studied. The specimens were made with the technology of additive manufacturing (3D printing) and were made of the same material which is polylactic acid reinforced with flax fibers (PFF). Several tensile tests were performed on four relative densities for each configuration of the composite to understand their influence on the static behavior of the material. Taking into account the insufficiency of the static tests to correctly predict the behavior of the composite, vibration tests were carried out on the same densities and composite configurations. The focus will be mainly on the study of the influence of the 2D lattice structures for each density on the evolution of the dynamic stiffness and damping properties.
引用
收藏
页数:22
相关论文
共 50 条
  • [1] Investigation of the Static Behavior and Failure Mechanisms of a 3D Printed Bio-Based Sandwich with Auxetic Core
    Essassi, Khawla
    Rebiere, Jean-Luc
    El Mahi, Abderrahim
    Ben Souf, Mohamed Amine
    Bouguecha, Anas
    Haddar, Mohamed
    INTERNATIONAL JOURNAL OF APPLIED MECHANICS, 2020, 12 (05)
  • [2] Experimental and numerical investigation of the static behavior of a 3D printed bio-based anti-trichiral sandwich
    Hamrouni, Anis
    Rebiere, Jean-Luc
    El Mahi, Abderrahim
    Beyaoui, Moez
    Haddar, Mohamed
    JOURNAL OF COMPOSITE MATERIALS, 2023, 57 (13) : 2161 - 2178
  • [3] Experimental and numerical analysis of the dynamic behavior of a bio-based sandwich with an auxetic core
    Essassi, Khawla
    Rebiere, Jean-Luc
    El Mahi, Abderrahim
    Ben Souf, Mohamed Amine
    Bouguecha, Anas
    Haddar, Mohamed
    JOURNAL OF SANDWICH STRUCTURES & MATERIALS, 2021, 23 (03) : 1058 - 1077
  • [4] Damping Analysis and Failure Mechanism of 3D Printed Bio-Based Sandwich with Auxetic Core under Bending Fatigue Loading
    Essassi, Khawla
    Rebiere, Jean-Luc
    El Mahi, Abderrahim
    Ben Souf, Mohamed Amine
    Bouguecha, Anas
    Haddar, Mohamed
    JOURNAL OF RENEWABLE MATERIALS, 2021, 9 (03) : 569 - 584
  • [5] Investigation of the Static and Dynamic Behavior of a 3D-Printed PFF Sandwich Composite with Conventional Honeycomb and Auxetic Core
    Essassi, Khawla
    Feki, Nabih
    Taktak, Wafa
    Rebiere, Jean-Luc
    El Mahi, Abderrahim
    Toure, Mahamane
    Ben Souf, Mohamed Amine
    Bouguecha, Anas
    Haddar, Mohamed
    JOURNAL OF THE CHINESE SOCIETY OF MECHANICAL ENGINEERS, 2022, 43 (05): : 473 - 483
  • [6] Investigation of the Static and Dynamic Behavior of a 3D-Printed PFF Sandwich Composite with Conventional Honeycomb and Auxetic Core
    Essassi, Khawla
    Feki, Nabih
    Taktak, Wafa
    Rebiere, Jean-Luc
    El Mahi, Abderrahim
    Toure, Mahamane
    Souf, Mohamed Amine Ben
    Bouguecha, Anas
    Haddar, Mohamed
    Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao, 2022, 43 (05): : 473 - 482
  • [7] Static and Dynamic Mechanical Properties of 3D printed Digital Materials
    Layth M. Ahmad
    Aaron Jackson
    Ashfaq Adnan
    Multiscale Science and Engineering, 2024, 6 (1) : 78 - 94
  • [8] Dynamic Characterization of a Bio-Based Sandwich with Auxetic Core: Experimental and Numerical Study
    Essassi, Khawla
    Rebiere, Jean-Luc
    El Mahi, Abderrahim
    Ben Souf, Mohamed Amine
    Bouguecha, Anas
    Haddar, Mohamed
    INTERNATIONAL JOURNAL OF APPLIED MECHANICS, 2019, 11 (02)
  • [9] Effect of hydric aging on the static and vibration behavior of 3D printed bio-based flax fiber reinforced poly-lactic acid composites
    Kesentini, Zeineb
    El Mahi, Abderrahim
    Rebiere, Jean-Luc
    El Guerjouma, Rachid
    Beyaoui, Moez
    Haddar, Mohamed
    POLYMERS & POLYMER COMPOSITES, 2022, 30
  • [10] Effect of hydric aging on the static and vibration behavior of 3D printed bio-based flax fiber reinforced poly-lactic acid composites
    Kesentini, Zeineb
    El Mahi, Abderrahim
    Rebiere, Jean-Luc
    El Guerjouma, Rachid
    Beyaoui, Moez
    Haddar, Mohamed
    POLYMERS & POLYMER COMPOSITES, 2022, 30