Exploration of Effect of Thermal Cycling Treatment on Mechanical and Tribological Performance of Polyimide Composites

被引：0
|
作者：
Wang, YanMing [1 ,2 ]
Wang, YiZheng [1 ,2 ]
Wu, ZhiCheng [1 ,2 ]
Zhang, XiaoLiang [1 ,2 ]
Li, FeiBo [1 ,2 ]
Wang, GuangShuo [1 ,2 ]
Li, ZongQi [1 ,2 ]
Mu, JingBo [1 ,2 ]
Li, Ping [1 ,2 ]
Zhang, ZhiXiao [1 ,2 ]
Wang, ZeHu [1 ,2 ]
Gao, XiaoHong [1 ,2 ]
机构：
[1] Hebei Univ Engn, Coll Mat Sci & technol, Technol innovat Ctr modified plast Hebei Prov, Handan, Peoples R China
[2] Key Lab New Inorgan Nonmet Composite Handan, Handan, Peoples R China
来源：
TRIBOLOGY TRANSACTIONS | 2023年 / 66卷 / 04期
基金：
中国国家自然科学基金;
关键词：
Polyimide composites; thermal cycling treatment; tribological and mechanical properties; FIBER; BEHAVIOR; WEAR;
D O I：
10.1080/10402004.2023.2217548
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Polyimide (PI) and PI composites reinforced with glass fiber (GF), and aramid fiber (AF) were fabricated with hot-pressing technology. Then polyimide and its composites were treated with a thermal cycling (TC) condition from -50 degrees C to 150 degrees C with 300 cycles continuously. Compared with the samples without TC treatment, the fracture morphologies, mechanics, and tribological properties of the samples were studied. The results showed that, based on the fractographic morphologies, the phenomenon of fiber stripping could be obviously observed in the PI composite materials after TC treatment. Compared with before TC treatment, the friction coefficients (FC) and wear rates (WR) of PI and PI composites showed different variations, respectively. In conclusion, TC treatment had a great influence on the morphologies of the worn surface and the composition of transfer film. As the shear force increased, the elemental analysis demonstrated that GF was extruded into the groove.
引用
收藏
页码：634 / 644
页数：11
相关论文
共 50 条
  • [41] Mechanical and Tribological Performance of Polypropylene/Tin Powder Composites
    Gulesen, Mustafa
    Yetgin, Salih Hakan
    Unal, Huseyin
    JOURNAL OF SCIENTIFIC & INDUSTRIAL RESEARCH, 2022, 81 (07): : 730 - 739
  • [42] Catecholated graphene-filled polyimide with enhanced mechanical, thermal, and tribological properties
    Wu, Xing
    Jin, Zhengyu
    Zhu, Yuejin
    Zhao, Haichao
    HIGH PERFORMANCE POLYMERS, 2021, 33 (01) : 40 - 51
  • [43] Thermal aging effects on mechanical and tribological performance of PEEK and short fiber reinforced PEEK composites
    Sinmazcelik, T.
    Yilmaz, T.
    MATERIALS & DESIGN, 2007, 28 (02) : 641 - 648
  • [44] Effect of Thermal Cycling on Microstructure and Mechanical Properties of Cf/SiC-Al Composites
    Liao, Jiahao
    Yang, Lixia
    Chen, Zhaofeng
    Guan, Tianru
    Liu, Tianlong
    ADVANCED ENGINEERING MATERIALS, 2023, 25 (10)
  • [45] Preparation and Tribological Performance of Graphene Oxide Modified Basalt Fiber/Polyimide Composites
    Li, Xuan
    Zhou, Dedong
    He, Yu
    Zhang, Lijing
    Lü, Wei
    Zhang, Xuyi
    Yang, Yuanpeng
    Liu, Zhizhang
    Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering, 2024, 40 (05): : 76 - 86
  • [46] Role of fullerene carbon on tribological performance of polyimide composites at a large temperature span
    Huimin, Qi
    Yang, Lei
    Jiaxin, Yu
    Gai, Zhao
    Baogang, Guo
    Liang, Zhou
    Ding, Zhang
    TRIBOLOGY INTERNATIONAL, 2022, 173
  • [47] Tribological Performance of Attapulgite Reinforced Polyimide Composites under Dry Friction Condition
    Yu P.
    Wang W.
    Xu Y.
    He R.
    Zhao F.
    Zhang G.
    Mocaxue Xuebao/Tribology, 2023, 43 (01): : 209 - 219
  • [48] Mechanical and Tribological Properties of Thermoplastic Polyimide Based Composites Loaded With Various PTFE Fillers
    Panin, S., V
    Luo Jiangkun
    Kornienko, L. A.
    Buslovich, D. G.
    Alexenko, V. O.
    OIL AND GAS ENGINEERING (OGE-2020), 2020, 2285
  • [49] Mechanical and Tribological Properties of Glass Fiber Reinforced Bismaleimide-Based Polyimide Composites
    Oi, Hidenori
    Nishitani, Yosuke
    PROCEEDINGS OF THE 36TH CONFERENCE OF THE POLYMER PROCESSING SOCIETY, PPS36, 2023, 2607
  • [50] Effects of ionic liquid types on the tribological, mechanical, and thermal properties of ionic liquid modified graphene/polyimide shape memory composites
    Ouyang, Yuting
    Zhang, Qiu
    Liu, Xiukun
    Hong, Ruan
    Xu, Xu
    Lu, Shaorong
    Li, Yuqi
    HIGH PERFORMANCE POLYMERS, 2021, 33 (08) : 881 - 891
12345