Evaluation of Phase Change Materials for Pre-Cooling of Supply Air into Air Conditioning Systems in Extremely Hot Climates

被引:4
|
作者
Masood, Usman [1 ]
Haggag, Mahmoud [2 ]
Hassan, Ahmed [2 ]
Laghari, Mohammad [1 ]
机构
[1] United Arab Emirates Univ, Elect & Commun Engn Dept, POB 15551, Al Ain, U Arab Emirates
[2] United Arab Emirates Univ, Architectural Engn Dept, POB 15551, Al Ain, U Arab Emirates
关键词
phase change materials (PCMs); thermal energy storage (TES); heat transfer augmentation; cooling load; buildings; latent heat thermal energy storage (LHTES); THERMAL STORAGE; ENERGY; PERFORMANCE; PCM; REDUCTION;
D O I
10.3390/buildings14010095
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
This research investigates the use of phase change materials (PCMs) in thermal energy storage (TES) unit-based cooling systems to increase the efficiency of air conditioners (ACs) by reducing the air inlet temperature. This study aims to evaluate different configurations of PCM enclosures, and different PCMs (paraffin and salt hydrate), by changing the speed of inlet air to achieve heat reduction of inlet air. The study includes experimental and simulation investigations. Every configuration simulates the hot-season atmospheric conditions of the UAE. A duct containing enclosures of paraffin RT-31 and salt hydrate (calcium chloride hexahydrate) was used for the simulation study using ANSYS/Fluent. A conjugate heat transfer model employing an enthalpy-based formulation is developed to predict the optimized PCM number of series and optimum airflow rate. Four designs of the AC duct were modelled and evaluated that contained one to four series of PCM containers subjected to different levels of supplied air velocities ranging from 1 m/s-4 m/s. The simulation study revealed that employing four series (Design 4) of PCM enclosures at a low air velocity of 1 m/s enhanced the pre-cooling performance and reduced the outlet air temperature to 33 degrees C, yielding a temperature drop up to 13 degrees C. The performance of salt hydrate (calcium chloride hexahydrate) was observed to be better than paraffin (RT-31) in terms of the cooling effect. Characterization of paraffin wax (RT-31) and salt hydrate was performed to establish the thermophysical properties. The experimental setup based on a duct with integrated PCM enclosures was studied. The experiment was repeated for three days as the repeatability test incorporating RT-31 as the PCM and a 3 degrees C maximum temperature drop was observed. The drop in the outlet air temperature of the duct system quantifies the cooling effect. Net heat reduction was around 16%.
引用
收藏
页数:28
相关论文
共 50 条
  • [31] Fresh air pre-cooling and energy recovery by using indirect evaporative cooling in hot and humid region - a case study in Hong Kong
    Chen, Yi
    Luo, Yimo
    Yang, Hongxing
    INTERNATIONAL CONFERENCE ON APPLIED ENERGY, ICAE2014, 2014, 61 : 126 - 130
  • [32] The evaluation of a thermal storage system using phase change materials in air distribution systems
    Yamaha, M
    Misaki, S
    INDOOR AIR 2005: PROCEEDINGS OF THE 10TH INTERNATIONAL CONFERENCE ON INDOOR AIR QUALITY AND CLIMATE, VOLS 1-5, 2005, : 1289 - 1293
  • [33] Thermal property analysis of phase change material for cooling storage air conditioning system
    Fang, GY
    Lu, DW
    Xu, XB
    CRYOGENICS AND REFRIGERATION - PROCEEDINGS OF ICCR'2003, 2003, : 729 - 732
  • [34] Air Conditioning using Waste Heat and Solar Energy with Phase Change Materials
    Stalin, Joseph
    Barath
    Manikandan, Gokula
    2013 INTERNATIONAL CONFERENCE ON ALTERNATIVE ENERGY IN DEVELOPING COUNTRIES AND EMERGING ECONOMIES (2013 AEDCEE), 2014, 52 : 579 - 587
  • [35] Performance and optimization of a novel solar-driven liquid desiccant air conditioning system suitable for extremely hot and humid climates
    Chen, Yingya
    Liu, Yanfeng
    Wang, Dengjia
    Luo, Xi
    Liu, Jingrui
    Liu, Jianan
    Wang, Yingying
    Liu, Jiaping
    ENERGY CONVERSION AND MANAGEMENT, 2020, 215
  • [36] Energy and Comfort Evaluation of Fresh Air-Based Hybrid Cooling System in Hot and Humid Climates
    Narayanan, Ramadas
    Sethuvenkatraman, Subbu
    Pippia, Roberto
    ENERGIES, 2022, 15 (20)
  • [37] Using phase change materials for residential air conditioning peak demand reduction and energy conservation in coastal and transitional climates in the State of California
    Lee, Kyoung Ok
    Medina, Mario A.
    ENERGY AND BUILDINGS, 2016, 116 : 69 - 77
  • [38] EVALUATION OF AIR SUPPLY CONDITIONING ARCHITECTURES FOR PEM FUEL CELL SYSTEMS IN AVIATION
    Meyer, Patrick
    Lueck, Sebastian
    Goeing, Jan
    Friedrichs, Jens
    PROCEEDINGS OF ASME TURBO EXPO 2024: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, GT2024, VOL 5, 2024,
  • [39] Consumer cost savings, improved thermal comfort, and reduced peak air conditioning demand through pre-cooling in Australian housing
    Naderi, Shayan
    Heslop, Simon
    Chen, Dong
    MacGill, Iain
    Pignatta, Gloria
    ENERGY AND BUILDINGS, 2022, 271
  • [40] Energy-Saving potential of radiative cooling and phase change materials in hot Climates: A numerical study
    Cao, Xiongjin
    Wang, Yan
    Luo, Kai
    Wang, Lei
    Liu, Xuying
    Luan, Yanding
    APPLIED THERMAL ENGINEERING, 2025, 268