Research on dynamic p-y curves in liquefied sand under cyclic loading conditions

Under dynamic cyclic loads, the pore water pressure in saturated sand rises continuously, which leads to the reduction of horizontal bearing capacity or the damage of the pile foundation. Under dynamic cyclic loads, the existing calculations methods of horizontal bearing capacity of pile foundations were obtained by proposing a reduction factor for the static p-y curve model mostly. Compared with the test results, the soil resistance around the pile obtained by this method is often overvalued and the pile-soil relative displacement has a relative underestimation. As a result, this method is not suitable for pile foundation design. Therefore, the variations of soil resistance around the pile and the pile-soil relative displacement are obtained by analyzing the effect of pore pressure ratio on soil strength around the pile in saturated sand in this paper. The theoretical formulas related to the cyclic vibration times and pore pressure ratio are proposed. The proposed formulas are introduced into the dynamic p-y curve model to obtain the dynamic p-y backbone curve in the process of sand liquefaction. The research results show that the variations of the soil resistance around the pile and the pile-soil relative displacement are related to the pore pressure ratio and the cyclic vibration times during the sand liquefaction. As the cyclic vibration times increases, the pore pressure increases, the soil resistance around the pile decreases and the pile-soil relative displacement increases.