Shock Hugoniot of an equiatomic high-entropy alloy NbMoTaW up to 143 GPa

被引:1
|
作者
Hu, Yu [1 ]
Wang, Yishi [1 ]
Yang, Gang [2 ]
Liu, Xun [1 ]
Huang, Haijun [1 ]
机构
[1] Wuhan Univ Technol, Sch Sci, Wuhan 430070, Peoples R China
[2] Jianghan Univ, State Key Lab Precis Blasting, Wuhan 430056, Peoples R China
基金
中国国家自然科学基金;
关键词
EQUATION-OF-STATE; COMPRESSION; COPPER; DAMAGE;
D O I
10.1063/5.0175854
中图分类号
O59 [应用物理学];
学科分类号
摘要
The equations of state and phase stabilities of high-entropy alloys (HEAs) under high-pressure and high-temperature conditions are of paramount importance for engineering applications. However, few reports exist on the high-pressure-temperature properties of the HfNbMoTaWV HEA system. Herein, we synthesized a NbMoTaW HEA using the vacuum arc melting method and measured its Hugoniot up to 143 GPa and similar to 6200 K. A linear relationship [U-S = 2.61 (7) + 1.59 (5) U-P] between the shock (U-S) and particle (U-P) velocities was observed for U-P > 0.7 km/s, suggesting that the NbMoTaW HEA is likely stable within the pressure-temperature range of the current study. Using the Debye-Mie-Gr & uuml;neisen model and Birch-Murnaghan equation of state (EOS), we discussed the EOS of the NbMoTaW HEA. The bulk modulus (K-0) and its pressure derivative (K-0 ') were determined to be 238 GPa and 3.3, respectively. We also found that the Hugoniot compression curve of the NbMoTaW HEA could be evaluated using the mixture rules with the Hugoniot data of the compositional elements.
引用
收藏
页数:7
相关论文
共 50 条
  • [31] Dynamic precipitation of σ-phase and element partitioning in equiatomic CoCrFeMnNi high-entropy alloy
    Lee, Unhae
    Straumal, Boris
    Park, Nokeun
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 804
  • [32] Microstructure and Mechanical Properties of a New Refractory Equiatomic CrHfNbTaTi High-Entropy Alloy
    Jiaojiao Yi
    Song Tang
    Chao Zhang
    Mingqin Xu
    Lin Yang
    Lu Wang
    Long Zeng
    JOM, 2021, 73 : 934 - 940
  • [33] Annealing-induced abnormal hardening in nanocrystalline NbMoTaW high-entropy alloy thin films
    Feng, Xiaobin
    Surjadi, James Utama
    Lu, Yang
    MATERIALS LETTERS, 2020, 275
  • [34] Microstructure-based alloy compression strengthening model of an equiatomic high-entropy alloy CoCrFeNiNb
    Cabibbo, M.
    Prusa, F.
    Spigarelli, S.
    Santecchia, E.
    Paoletti, C.
    METALLURGIA ITALIANA, 2021, (7-8): : 8 - 20
  • [35] Microstructure-based alloy compression strengthening model of an equiatomic high-entropy alloy CoCrFeNiNb
    Cabibbo, M.
    Prùša, F.
    Spigarelli, S.
    Santecchia, E.
    Paoletti, C.
    Metallurgia Italiana, 2021, 113 (07): : 8 - 20
  • [36] Weak enthalpy-interaction-element-modulated NbMoTaW high-entropy alloy thin films
    Bi, Linxia
    Li, Xiaona
    Hu, Yinglin
    Zhang, Junyi
    Wang, Xiao
    Cai, Xuecheng
    Shen, Tongde
    Liu, Renwei
    Wang, Qing
    Dong, Chuang
    Liaw, Peter K.
    APPLIED SURFACE SCIENCE, 2021, 565
  • [37] Structures and properties of the (NbMoTaW)100−xCx high-entropy composites
    Wan, Yixing
    Wang, Xin
    Zhang, Zhibin
    Mo, Jinyong
    Shen, Baolong
    Liang, Xiubing
    Journal of Alloys and Compounds, 2022, 889
  • [38] Dynamic recrystallization behavior of the equiatomic FeCoCrNi high-entropy alloy during high temperature deformation
    Sajadi, Seyyed Ali
    Toroghinejad, Mohammad Reza
    Rezaeian, Ahmad
    Ebrahimi, Gholam Reza
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 20 : 1093 - 1109
  • [39] High-temperature low cycle fatigue behavior of an equiatomic CoCrFeMnNi high-entropy alloy
    Lu, Kaiju
    Chauhan, Ankur
    Litvinov, Dimitri
    Walter, Mario
    Tirunilai, Aditya Srinivasan
    Freudenberger, Jens
    Kauffmann, Alexander
    Heilmaier, Martin
    Aktaa, Jarir
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 791
  • [40] High-temperature deformation mechanisms and processing maps of equiatomic CoCrFeMnNi high-entropy alloy
    Jeong, H. T.
    Park, H. K.
    Park, K.
    Na, T. W.
    Kim, W. J.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 756 : 528 - 537