Further Validation of a Simple Mathematical Description of Wear and Contact Pressure Evolution in Sliding Contacts

被引:1
|
作者
Di Puccio, Francesca [1 ]
Mattei, Lorenza [1 ]
机构
[1] Univ Pisa, Dept Civil & Ind Engn, Largo Lucio Lazzarino 2, I-56122 Pisa, Italy
关键词
wear; wear model; Archard wear law; non-conformal contact; contact pressure; pin-on-plate wear test; SIZE;
D O I
10.3390/lubricants11050230
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
The present study proposes the further validation of a simple mathematical procedure recently proposed by the authors to describe contact and wear evolution in line and point contacts. The procedure assumed that the maximum contact pressure could be determined using Hertz equations and a parabolic pressure profile. The contact half-width was obtained using the equilibrium equation and the Archard wear law. Several cases were selected from the literature, reporting experimental data or Finite Element simulations, and the results were compared to those obtained with the proposed approach. This paper confirms the reliability and potentialities of the proposed analytical procedure, which is capable of providing accurate solutions in case of frictional contacts and at the borders of the contact area, where the main discrepancies were found in the previous study.
引用
收藏
页数:12
相关论文
共 50 条
  • [31] Deformation, Wear and Microstructural Evolution of Nano-structured Pearlite Under Repeated Contact Sliding
    Mishra, Kushal
    Pachauri, Abhishek
    Singh, Aparna
    TRIBOLOGY LETTERS, 2018, 66 (03)
  • [32] Microstructure Evolution and Fretting Wear Mechanisms of Steels Undergoing Oscillatory Sliding Contact in Dry Atmosphere
    Maich, Alyssa A.
    Gronsky, Ronald
    Komvopoulos, Kyriakos
    MATERIALS, 2024, 17 (08)
  • [33] Wear process of single crystal diamond affected by sliding velocity and contact pressure in mechanical polishing
    Yang, Ning
    Zong, Wenjun
    Li, Zengqiang
    Sun, Tao
    DIAMOND AND RELATED MATERIALS, 2015, 58 : 46 - 53
  • [34] Analytical Assessment of the Sliding Friction Coefficient Influence on Durability, Wear and Contact Pressure in Spur Gears
    Chernets, M.
    Kornienko, A.
    Chernets, Yu
    Fedorchuk, S.
    FME TRANSACTIONS, 2021, 49 (02): : 472 - 479
  • [35] Study of the Influence of Contact Geometry and Contact Pressure on Sliding Distance to Galling in the Slider-on-Flat-Surface Wear Tester
    Lindvall, Fredrik
    Gaard, Anders
    Krakhmalev, Pavel
    Bergstrom, Jens
    TRIBOLOGY TRANSACTIONS, 2013, 56 (06) : 1137 - 1145
  • [36] Wear damage and effects of graphene-based lubricants/coatings during linear reciprocating sliding wear at high contact pressure
    Mishra, Dewika
    Sonia, Farjana J.
    Srivastava, Dinesh
    Ganesha, G. N.
    Singha, Utpal
    Mukhopadhyay, Amartya
    WEAR, 2018, 400 : 144 - 155
  • [37] Effect of contact pressure on wear and friction of ultra-high molecular weight polyethylene in multidirectional sliding
    Saikko, V.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE, 2006, 220 (H7) : 723 - 731
  • [38] The effect of tribomaterial pairings on wear of an aluminum slider under high sliding speeds and high contact pressure
    Siopis, M. J.
    Neu, R. W.
    WEAR, 2016, 352-353 : 180 - 187
  • [39] Wear mapping and transitions in wheel and rail materials under different contact pressure and sliding velocity conditions
    Ding, H. H.
    He, C. G.
    Ma, L.
    Guo, J.
    Liu, Q. Y.
    Wang, W. J.
    WEAR, 2016, 352-353 : 1 - 8
  • [40] Frictional heat accumulation at cyclically rolling-sliding contacts with consideration to time-dependent contact pressure
    Fang, Ma
    Liqin, Wang
    Dezhi, Zheng
    Wenxue, Wang
    Tingjian, Wang
    Lupeng, Wu
    Le, Gu
    Chuanwei, Zhang
    TRIBOLOGY INTERNATIONAL, 2024, 191