Effect of eco-friendly rosin sealant on wear resistance of Fe-based amorphous coating

被引:0
|
作者
Wang, Guangyu [1 ]
Zhou, Zehua [1 ,2 ]
Zhang, Kaicheng [1 ]
Wu, Lintao [1 ]
Shi, Xiangru [1 ]
Zhang, Xin [1 ]
机构
[1] Hohai Univ, Coll Mech & Mat, Nanjing 211100, Peoples R China
[2] Nanjing Hohai Univ, Jiangning Campus, Nanjing, Peoples R China
关键词
Nature rosin; Sealing; Wear mechanism; Fe-based amorphous coating; CORROSION-RESISTANCE; BEHAVIOR;
D O I
10.1016/j.matlet.2023.134855
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Natural rosin was introduced as the sealing material of Fe-based amorphous coating. The permeability and wear mechanism of rosin sealant were investigated. The research shows that the penetration depth of the sealant reaches more than 150 & mu;m, which effectively seals the pore network inside the coating. Under the sliding friction condition, the rosin sealant in the micro-pore can be released slowly and used as the lubricating medium. After the introduction of natural rosin, the friction volume of the coating decreased from 0.73 mm3 to 0.089 mm3, the degree of adhesive wear and oxidation wear decreases, and the wear resistance of the coating increased significantly.
引用
收藏
页数:4
相关论文
共 50 条
  • [41] Wear Resistance of Fe-based Nanostructured Hardfacing
    Gualco, Agustin
    Marini, Cristian
    Svoboda, Hernan
    Surian, Estela
    INTERNATIONAL CONGRESS OF SCIENCE AND TECHNOLOGY OF METALLURGY AND MATERIALS, SAM - CONAMET 2013, 2015, 8 : 934 - 943
  • [42] Simultaneously enhancing wear and corrosion resistance of HVAF-sprayed Fe-based amorphous coating from Mo clad feedstock
    Liu, Xiaoqing
    Wu, Yaosha
    Qiu, Zhaoguo
    Lu, Zhengyi
    Yao, Shunqiang
    Zhuo, Shiye
    Zeng, Dechang
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2022, 302
  • [43] A Hard and Thick Fe-Based Amorphous Composite Coating
    Hu, Weiqiang
    Liu, Zongde
    Yang, Guang
    Wang, Yongtian
    Zhang, Hualei
    MANUFACTURING PROCESS TECHNOLOGY, PTS 1-5, 2011, 189-193 : 858 - 862
  • [44] Corrosion resistance of Fe-based amorphous alloys
    Botta, W. J.
    Berger, J. E.
    Kiminami, C. S.
    Roche, V.
    Nogueira, R. P.
    Bolfarini, C.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 586 : S105 - S110
  • [45] Influence of the size of spraying powders on the microstructure and corrosion resistance of Fe-based amorphous coating
    Zhang, C.
    Guo, R. Q.
    Yang, Y.
    Wu, Y.
    Liu, L.
    ELECTROCHIMICA ACTA, 2011, 56 (18) : 6380 - 6388
  • [46] Microstructures and corrosion resistance of Fe-based amorphous/nanocrystalline coating fabricated by laser cladding
    Wang, S. L.
    Zhang, Z. Y.
    Gong, Y. B.
    Nie, G. M.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 728 : 1116 - 1123
  • [47] Effect of different carbides on the wear resistance of Fe-based hardfacing alloys
    Pawar, Sachin
    Jha, Aman Kumar
    Mukhopadhyay, Goutam
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2019, 78 : 288 - 295
  • [48] Effect of molybdenum on the microstructure and wear resistance of Fe-based hardfacing coatings
    Wang, X. H.
    Han, F.
    Liu, X. M.
    Qu, S. Y.
    Zou, Z. D.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 489 (1-2): : 193 - 200
  • [49] Study on Corrosion Resistance of Fe-Based Amorphous Coating by Laser Cladding in Hydrochloric Acid
    Chen, Q. J.
    Guo, S. B.
    Yang, X. J.
    Zhou, X. L.
    Hua, X. Z.
    Zhu, X. H.
    Duan, Z.
    INTERNATIONAL FEDERATION FOR HEAT TREATMENT AND SURFACE ENGINEERING (20TH CONGRESS), 2013, 50 : 297 - 303
  • [50] Effect of power spinning on microstructure and wear resistance of high-speed laser cladding Fe-based coating
    Bai, Qiaofeng
    Li, Qihang
    Zhang, Jian
    Wang, Rui
    Zhao, Chunjiang
    Liu, Yingliang
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2023, 125 (7-8): : 3255 - 3265