Analysis of Wind Farms under Different Yaw Angles and Wind Speeds

被引:0
|
作者
Das, Rubel C. C. [1 ]
Shen, Yu-Lin [1 ]
机构
[1] Univ New Mexico, Dept Mech Engn, Albuquerque, NM 87131 USA
关键词
wake steering; wind speed variability; yawed wind farm; large-eddy simulation; TURBINE WAKES; ENERGY; TUNNEL; FLOW; MODEL;
D O I
10.3390/en16134953
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
Wind farm optimization is pivotal in maximizing energy output, reducing costs, and minimizing environmental impact. This study comprehensively explores wind farm behavior under varying wind conditions and yaw angles to achieve these objectives. The primary motivation is to optimize wind farm performance and efficiency through proper yaw adjustment in response to wind speed changes. A computational investigation using a three-by-three wind turbine array was conducted, employing large eddy simulation (LES) to evaluate wind farm performance. Nine LES cases were considered, incorporating three wind speeds (7.3 ms(-1), 10.4 ms(-1), and 4.3 ms(-1)) and three yaw angles (30 & DEG;, 20 & DEG;, and 0 & DEG;), with nearly constant turbulence intensity (TI) at 12.0%. The impact of wind speed and yaw angles on wake characteristics and power outputs were analyzed. The findings reveal that wind speed has limited influence on wake characteristics and power outputs, except for lower wind speeds at a yaw angle of 20 degrees. These results contribute to understanding wind farm performance optimization, aiding in developing strategies to enhance energy extraction while minimizing costs and environmental implications.
引用
下载
收藏
页数:19
相关论文
共 50 条
  • [41] Wind direction prediction for yaw control of wind turbines
    Dongran Song
    Jian Yang
    Yao Liu
    Mei Su
    Anfeng Liu
    Young Hoon Joo
    International Journal of Control, Automation and Systems, 2017, 15 : 1720 - 1728
  • [42] Ramping Behaviour Analysis of Wind Farms
    Mishra, Sambeet
    Leinakse, Madis
    Palu, Ivo
    Kilter, Jako
    2018 IEEE INTERNATIONAL CONFERENCE ON ENVIRONMENT AND ELECTRICAL ENGINEERING AND 2018 IEEE INDUSTRIAL AND COMMERCIAL POWER SYSTEMS EUROPE (EEEIC / I&CPS EUROPE), 2018,
  • [43] Modelling the nacelle wake of a horizontal-axis wind turbine under different yaw conditions
    Gao, Zhiteng
    Li, Ye
    Wang, Tongguang
    Shen, Wenzhong
    Zheng, Xiaobo
    Probsting, Stefan
    Li, Deshun
    Li, Rennian
    RENEWABLE ENERGY, 2021, 172 : 263 - 275
  • [44] A Dynamic Equivalent Method for PMSG-WTG Based Wind Farms Considering Wind Speeds and Fault Severities
    Li, Dongsheng
    Shen, Chen
    Liu, Ye
    Chen, Ying
    Huang, Shaowei
    IEEE TRANSACTIONS ON POWER SYSTEMS, 2024, 39 (02) : 3738 - 3751
  • [45] Comparative analysis of fatigue life of a wind turbine yaw bearing with different support foundations
    Xu, Jianwen
    Benson, Simon
    Wetenhall, Ben
    OCEAN ENGINEERING, 2021, 235
  • [46] The Evaluation of the Wind Loads on a Wind Turbine under Different Wind Conditions
    Xiao, Shuo-You
    Shih, Yang-Cheng
    8TH THERMAL AND FLUIDS ENGINEERING CONFERENCE, 2023, : 293 - 295
  • [47] RESEARCH ON IPC-BASED VARIABLE-SPEED SHUTDOWN CONTROL OF WIND TURBINES UNDER LARGE YAW ANGLES
    Zhou L.
    Ren Y.
    Taiyangneng Xuebao/Acta Energiae Solaris Sinica, 2023, 44 (03): : 178 - 184
  • [48] CFD analysis and experimental investigation to determine the flow characteristics around NACA 4412 airfoil blades at different wind speeds and blade angles
    Afshari, Faraz
    Khanlari, Ataollah
    Sozen, Adnan
    Tuncer, Azim Dogus
    Ates, Ibrahim
    Sahin, Bayram
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2023, 237 (05) : 1915 - 1925
  • [49] Aerodynamic Load Variation and Wind-Induced Vibration Analysis of Tower Cranes Under Full Wind Angles
    Liu, Qingjie
    Zhang, Ruijun
    Sun, Shuai
    Zhang, Jibin
    INTERNATIONAL JOURNAL OF ACOUSTICS AND VIBRATION, 2024, 29 (02): : 101 - 115
  • [50] Analysis of yaw characteristics of wind turbines in mountain wind farm based on SCADA data
    Zhu, Anfeng
    Xiao, Zhao
    Zhao, Qiancheng
    Huang, Lingxiang
    Gui, Lin
    NINTH INTERNATIONAL SYMPOSIUM ON PRECISION MECHANICAL MEASUREMENTS, 2019, 11343