Generation of a Flat Optical Frequency Comb via a Cascaded Dual-Parallel Mach-Zehnder Modulator and Phase Modulator without Using the Fundamental Tone

Under the conventional scheme to generate an optical frequency comb (OFC) using an electro-optic modulator (EOM), the frequency interval of the OFC is determined via the frequency of the fundamental tone of the radio frequency (RF) driving signals. In this work, we use two harmonics without the fundamental tone to drive two EOMs, where the frequency interval of the generated flat OFC is the frequency of the fundamental tone. The orders of the two harmonics are coprime. Specifically, one harmonic drives the first branch of the dual-parallel Mach-Zehnder modulator (DPMZM) only, and the other harmonic drives the phase modulator (PM). The flatness of the OFC is achieved by adjusting the amplitude and phase of the RF driving harmonics as well as the bias of the EOM. Both a simulation and an experiment were carried out to verify the effectiveness of the proposed scheme. When the second harmonic drives the DPMZM and the third harmonic drives the PM, an 11-comb line OFC is generated, where the flatness of the OFC was 0.63 dB and 0.65 dB under the simulation and experiment, respectively. When the third harmonic drives the DPMZM and the second harmonic drives the PM, a 13-comb line OFC is generated, where the flatness of the OFC was 0.62 dB and 0.95 dB under the simulation and experiment, respectively. We also investigate the performance of the generated OFC when one harmonic drives two branches of the DPMZM and the other harmonic drives the PM. The comparison of the OFCs' performance demonstrates the effectiveness of the proposed scheme.