Towards cost-effective CO2 adsorption materials: Case of CuBTC - Hydrochar composite

被引:3
|
作者
Mai, Nga T. [1 ,2 ]
Mai, Phuong T. [2 ]
Dinh, Thanh T. M. [3 ]
V. Nguyen, Dong [3 ]
Nguyen, Phuong T. [4 ]
Nguyen, Nam H. [3 ]
机构
[1] Vietnam Natl Univ, VNU Univ Sci, Fac Environm Sci, Hanoi VNU, Hanoi 100000, Vietnam
[2] Minist Sci & Technol, Vietnam Korea Inst Sci & Technol, Div Biotechnol, Hanoi 100000, Vietnam
[3] Univ Sci & Technol Hanoi, Vietnam Acad Sci & Technol, Hanoi 100000, Vietnam
[4] Vietnam Acad Sci & Technol, Inst Trop Technol, Hanoi 100000, Vietnam
来源
关键词
Biochar; CuBTC MOF; CO2; adsorption; METAL-ORGANIC FRAMEWORKS; CU-BTC; CARBON-DIOXIDE; CAPTURE PERFORMANCE; ACTIVATED CARBONS; GRAPHENE OXIDE; BIOMASS; PYROLYSIS; NANOTUBES; SORBENTS;
D O I
10.1016/j.mtcomm.2023.107619
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
This study focuses on synthesizing composite materials of biochar/hydrochar derived from rice straw and Copper benzene-1,3,5-tricarboxylate (CuBTC), a commercialized metal-organic framework, to enhance CO2 adsorption. The composite was synthesized using an electrochemical method based on CuBTC, biochar and hydrochar. The composite materials exhibited a significant increase in adsorption efficiency, with the combination of hydrochar and CuBTC showing the highest efficiency at 26%, compared to 3-4% and 15% for biochar/hydrochar and CuBTC alone, respectively. These composite materials have good promise for highly selective CO2/N-2 separation at room temperature. The SEM results showed that the hydrothermal method produced hydrochar that was small, uniform, and spherical in shape, which facilitated its combination with CuBTC. EDS chemical composition analysis indicated that the C:Cu ratio in biochar was 5:1, while in hydrochar, it was approximately 1.5:1. Moreover, the combination of hydrochar and CuBTC significantly increased the surface area of the material. Specifically, the surface area increased from 187 to 635 m(2)g(-1) and 164-795 m(2)g(-1) for biochar and hydrochar, respectively. Moreover, the microcapillary structure of the composite was also improved compared to the parent materials, which enhanced the CO2 adsorption capacity. Both chemical adsorption from surface functional groups and physical adsorption through the proliferation of micro capillaries and the Van der Walls effect can collectively explain the CO2 adsorption using the CuBTC-Hydrochar composite. Additionally, the composite of biochar/hydrochar with CuBTC reduced the sensitivity of CuBTC to moisture exposure, offering high practical applicability of the composite. The use of rice straw, an abundant by-product in Vietnam, along with the application of an electrochemical method, constitutes the novel and valuable contribution of this study.
引用
收藏
页数:11
相关论文
共 50 条
  • [31] Cost-effective balance between CO2 vessel and pipeline transport: Part II - Design of multimodal CO2 transport: The case of the West Mediterranean region
    Geske, Joachim
    Berghout, Niels
    van den Broek, Machteld
    INTERNATIONAL JOURNAL OF GREENHOUSE GAS CONTROL, 2015, 33 : 122 - 134
  • [32] Exploring the structural characteristics and adsorption capabilities of cost-effective N- doped activated carbon derived from waste biomass for CO2 adsorption
    Lotfinezhad, Masoumeh
    Tahmasebpoor, Maryam
    Pevida, Covadonga
    ENVIRONMENTAL RESEARCH, 2024, 263
  • [33] Microporous materials for the effective adsorption and separation of CO2 from flue gases
    Prodinger, Sebastian
    Derewinski, Miroslaw
    Motkuri, Radha Kishan
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2017, 253
  • [34] Preparation and CO2 Adsorption of Polymer Composite Films Containing Mesoporous Materials
    Sim, Sora
    Cho, Eun-Bum
    POLYMER-KOREA, 2017, 41 (03) : 413 - 424
  • [35] Simplified and cost-effective pressure swing adsorption system for simultaneous production of bio-methane & biogenic CO2 from biogas
    Ganesan, Saravanakumar
    Canevesi, Rafael L.S.
    Grande, Carlos A.
    Energy Conversion and Management, 2025, 325
  • [36] Searching for a cost-effective method of determining sorption properties for the industrial use of CO2 capture
    Staf, Marek
    Kyselova, Veronika
    CHEMICAL PAPERS, 2023, 77 (10) : 6217 - 6233
  • [37] Facile fabrication of cost-effective porous polymer networks for highly selective CO2 capture
    Sun, Lin-Bing
    Li, Ai-Guo
    Liu, Xiao-Dan
    Liu, Xiao-Qin
    Feng, Dawei
    Lu, Weigang
    Yuan, Daqiang
    Zhou, Hong-Cai
    JOURNAL OF MATERIALS CHEMISTRY A, 2015, 3 (07) : 3252 - 3256
  • [38] Prospects for cost-effective post-combustion CO2 capture from industrial CHPs
    Kuramochi, Takeshi
    Faaij, Andre
    Ramirez, Andrea
    Turkenburg, Wim
    INTERNATIONAL JOURNAL OF GREENHOUSE GAS CONTROL, 2010, 4 (03) : 511 - 524
  • [39] Development of a cost-effective CO2 adsorbent from petroleum coke via KOH activation
    Jang, Eunji
    Choi, Seung Wan
    Hong, Seok-Min
    Shin, Sangcheol
    Lee, Ki Bong
    APPLIED SURFACE SCIENCE, 2018, 429 : 62 - 71
  • [40] A cost-effective synthesis of heteroatom-doped porous carbons as efficient CO2 sorbents
    Ashourirad, Babak
    Arab, Pezhman
    Islamoglu, Timur
    Cychosz, Katie A.
    Thommes, Matthias
    El-Kaderi, Hani M.
    JOURNAL OF MATERIALS CHEMISTRY A, 2016, 4 (38) : 14693 - 14702