Processing and Tribological Properties of PEO Coatings on AlZn5.5MgCu Aluminium Alloy with Incorporated Al-Cu-Fe Quasicrystals

被引：3

作者：

Torskaya, Elena V. ^{[1
]}

Morozov, Alexei V. ^{[1
]}

Malyshev, Vladimir N. ^{[2
]}

Shcherbakova, Olga O. ^{[1
]}

机构：

[1] Ishlinsky Inst Problems Mech RAS, Moscow 119526, Russia

[2] Natl Univ Oil & Gas Gubkin Univ, Fac Engn Mech, Dept Tribol & Repair Technol Oil & Gas Equipment, Moscow 119991, Russia

来源：

CERAMICS-SWITZERLAND | 2023年 / 6卷 / 02期

关键词：

ceramic coatings; Al-Cu-Fe quasicrystals; friction; wear; PLASMA ELECTROLYTIC OXIDATION; MECHANICAL-PROPERTIES; MICROSTRUCTURE; FRICTION;

D O I：

10.3390/ceramics6020049

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The modification of ceramic PEO coatings developed for friction units is in trend of modern research aimed at the improvement of friction and wear. This study presents ceramic coatings formed on AlZn5.5MgCu aluminum alloy by microarc oxidation (PEO) in a one-stage technological process with inclusions of Al-Cu-Fe quasi-crystals. The technology of rubbing quasi-crystals into the surface of the coating during final polishing was also used. Friction and wear tests, followed by analysis of the surface and cross-sections by SEM microscopy, showed that quasicrystals affect the coating structure and frictional characteristics. The addition of a small amount of modifier to the electrolyte (0.5 percent), as well as rubbing-in technology, can reduce the coefficient of friction (up to 16 percent) and wear rate (up to 43 times) compared to pure ceramic coatings. More modifier provides a negative result.

引用

页码：858 / 871

页数：14

共 50 条

[31] Thermo-physical properties of ternary Al-Cu-Fe alloy in liquid state
Mehta, U.
Yadav, S. K.
Koirala, I.
Adhikari, D.
PHILOSOPHICAL MAGAZINE, 2020, 100 (19) : 2417 - 2435
[32] Tribological properties of the ceramic coatings prepared by plasma electrolytic oxidation (PEO) on the Al6061 alloy
Wang, Kai
Beyun, Sang Sik
Koo, Bon Heun
Wang, Yi Qi
Song, Jung Il
MULTI-FUNCTIONAL MATERIALS AND STRUCTURES III, PTS 1 AND 2, 2010, 123-125 : 1063 - +
[33] Microstructures and mechanical properties of pure Al matrix composites reinforced by Al-Cu-Fe alloy particles
Tang, F
Anderson, IE
Biner, SB
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 363 (1-2): : 20 - 29
[34] Formation of the Structure and Physicomechanical Properties of a Quasicrystalline Al-Cu-Fe Alloy upon Plasma Spraying
Lepeshev, A. A.
Karpov, I. V.
Ushakov, A. V.
PHYSICS OF THE SOLID STATE, 2017, 59 (03) : 438 - 442
[35] Influence of aging on mechanical properties, wear and residual stress of a Heusler Al-Cu-Fe alloy
Husem, Fazil
Tezel, Fatma Meydaneri
Turan, Muhammet Emre
MATERIALS TESTING, 2019, 61 (01) : 56 - 60
[36] Experimental Investigation of Laser Metal Deposited Icosahedral Al-Cu-Fe Coatings on Grade Five Titanium Alloy
Gharehbaghi, Rezvan
Akinlabi, Esther Titilayo
Fatoba, Olawale Samuel
PROCEEDINGS OF 2018 IEEE 9TH INTERNATIONAL CONFERENCE ON MECHANICAL AND INTELLIGENT MANUFACTURING TECHNOLOGIES (ICMIMT 2018), 2018, : 31 - 36
[37] Laser-clad Al-Matrix coatings reinforced with icosahedral quasicrystals obtained using Al-Cu-Fe–Cr decagonal quasicrystalline powders on Al substrates
A. V. Rodrigues
A. F. Ramirez
J. B. Fogagnolo
W. Wolf
Journal of Materials Science, 2025, 60 (14) : 6369 - 6386
[38] Effect of ECAE on Microstructure and Tribological Properties of Cu–10%Al–4%Fe Alloy
L. L. Gao
X. H. Cheng
Tribology Letters, 2007, 27 : 221 - 225
[39] Microstructural analysis, micro-hardness and wear resistance properties of quasicrystalline Al-Cu-Fe coatings on Ti-6Al-4V alloy
Fatoba, O. S.
Akinlabi, S. A.
Akinlabi, E. T.
Gharehbaghi, R.
MATERIALS RESEARCH EXPRESS, 2018, 5 (06):
[40] Modification of Structure and Physico-Mechanical Properties of Al-Cu-Fe Quasicrystal Alloy at Plasma Spraying
Lepeshev, A.
Sordelet, D. J.
Rozhkova, E.
Ushakov, A.
JOURNAL OF CLUSTER SCIENCE, 2011, 22 (02) : 289 - 294

← 1 2 3 4 5 →