Accelerated transformation of plastic furniture into microplastics and nanoplastics by fire

Numerous plastic items are known to gradually degrade and release microplastics and nanoplastics under certain conditions, which can be significantly accelerated by fire combustion. Unfortunately there is a limited knowledge about this burning process because the characterisation on microplastics and nanoplastics is still a challenge. In this study, an outdoor plastic chair is subjected to a combustion process, the change in the surface functional groups (due to different degree of burning) and the release of microplastics and nanoplastics are investigated. During the combustion process, the plastic is molten, burned and deposited on solid surfaces including concrete, stone and glass. Scanning electron microscopy (SEM) results show that the peeling off the deposited plastic generates a large number of fragments. Through Raman imaging, these fragments are characterised as polypropylene (PP) microplastics and nanoplastics due to appearance of characteristic peaks. To further increase the sensitivity, several algorithms are tested and optimised, including logic-based, non-supervised principal component analysis (PCA)-based, algebra-based and their hybrids (to intentionally correct the non-supervised PCA) to enable the effective extraction of the key information towards plastics characterisation, particularly by distinguishing the signal from the background noise towards the visualisation of the different degrees of burning. Based on the findings from Raman imaging and SEM, it is estimated that tens of microplastics and nanoplastics are created per mu m(2). Overall Raman imaging can be a suitable approach to characterise the microplastics and nanoplastics in a complex background, such as the fire-burned plastic items.