Numerical and experimental study on the synergistic effect of vortex and contact surface of fluid in the inlet section of micromixer

被引:3
|
作者
Qin, Litao [1 ]
Yue, Jincai [1 ]
Zhou, Dongjian [1 ]
Yang, Anming [1 ]
Zheng, Shiqing [1 ]
机构
[1] Qingdao Univ Sci & Technol, Coll Chem Engn, Qingdao 266042, Shandong, Peoples R China
关键词
Micromixer; Flux across line; Inlet vortex; Synergistic effect; Mixing efficiency; Visualization experiment; T-SHAPED MICROMIXER; FLOW REGIMES; MIXER; DIFFUSION; IDENTIFICATION; MICROCHANNELS; EFFICIENCY; VORTICES;
D O I
10.1016/j.cep.2023.109645
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
The promoting effect of vortex on the mixing performance of micromixer is difficult to be quantitatively evaluated. In this study, the concept of flux across line (FAL) is proposed for the first time to quantitatively analyze the influence of synergistic effect between the vortex and the contact surface of fluid on the mixing. The FAL value of T-shaped and cross-shaped micromixers is obtained by integrating the velocity component after decomposing the velocity vector on the cross section of the straight channel. The intensity distribution and development of vortex in the inlet section are quantitatively revealed by numerical simulation at Re = 50. Ac-cording to the FAL analysis, a two-layer feed T-shaped micromixer (TLFT-shaped) is designed to verify the effective synergy between vortex and contact surface of fluid. The FAL value of TLFT-shaped is 40-50 % higher than that of cross-shaped, the promoting effect of vortex on mixing is reflected in the mixing index, which experiences a notable 56 % increase. The concentration distributions of visualization experiments and simulations are consistent, which proves the accuracy of simulation results. The FAL analysis can quantitatively evaluate the promotion effect of vortex on mixing, which provides valuable guidance for the design of microfluidic devices.
引用
收藏
页数:12
相关论文
共 50 条
  • [21] Numerical Study of the Surface Roughness, Thermal Conductivity of the Contact Materials and Interstitial Fluid Convection Coefficient Effect on the Thermal Contact Conductance
    Rachid, Chadouli
    Lebon, Frederic
    Rosu, Iulian
    Mohammed, Makhlouf
    ANNALES DE CHIMIE-SCIENCE DES MATERIAUX, 2019, 43 (04): : 265 - 271
  • [22] NUMERICAL STUDY OF INLET CROSS-SECTION EFFECT ON OBLIQUE FINNED MICROCHANNEL HEAT SINK
    Vinoth, Rajendran
    Senthil Kumar, Duraisamy
    THERMAL SCIENCE, 2018, 22 (06): : 2747 - 2757
  • [23] Numerical analysis and experimental validation of a submerged inlet on the plane surface
    Sun, Shu
    Guo, Kong-Wei
    Chinese Journal of Aeronautics, 2005, 18 (03): : 199 - 205
  • [24] Experimental and Numerical Study on a Planar Passive Micromixer with Semicircle Mixing Elements
    Xie, Haibo
    Zhao, Xinbo
    Yang, Huayong
    2010 IEEE/ASME INTERNATIONAL CONFERENCE ON ADVANCED INTELLIGENT MECHATRONICS (AIM), 2010,
  • [25] Experimental Study of Liquid Behavior in T-Micromixer at Different Inlet Flow Rate Ratios
    A. Yu. Kravtsova
    I. V. Naumov
    Journal of Engineering Thermophysics, 2022, 31 : 537 - 550
  • [26] Experimental Study of Liquid Behavior in T-Micromixer at Different Inlet Flow Rate Ratios
    Kravtsova, A. Yu
    Naumov, I., V
    JOURNAL OF ENGINEERING THERMOPHYSICS, 2022, 31 (03) : 537 - 550
  • [27] Water droplets in oil at the inlet of an EHD contact: A dual experimental and numerical investigation
    Zhang, F.
    Fillot, N.
    Bouscharain, N.
    Devaux, N.
    Philippon, D.
    Matta, C.
    Morales-Espejel, G. E.
    TRIBOLOGY INTERNATIONAL, 2023, 177
  • [28] Experimental/Numerical Study of Ducted-Fan Noise: Effect of Duct Inlet Shape
    Shur, Michael
    Strelets, Michael
    Travin, Andrey
    Christophe, Julien
    Kucukcoskun, Korcan
    Schram, Christophe
    Sack, Stefan
    Abom, Mats
    AIAA JOURNAL, 2018, 56 (03) : 979 - 996
  • [29] A NUMERICAL SIMULATION OF THE EFFECT OF INLET GAS TEMPERATURE ON THE ENERGY SEPARATION IN A VORTEX TUBE
    Pourmahmoud, Nader
    Rahimi, Masoud
    Rafiee, Seyyed Ehsan
    Hassanzadeh, Amir
    JOURNAL OF ENGINEERING SCIENCE AND TECHNOLOGY, 2014, 9 (01): : 81 - 96
  • [30] Study on the length of pipe inlet section of pulp fluid based on CFD
    Gao, Song
    Du, Xinwu
    Jin, Shengjie
    Liu, Qiaohong
    Ma, Hao
    MEASUREMENT & CONTROL, 2020, 53 (9-10): : 1709 - 1719