Evolution of Defects during Cold Rolling of Low-Alloy Molybdenum Alloys

被引：0

作者：

Gnesin, B. A. ^{[1
]}

Karpov, M. I. ^{[1
]}

Aristova, I. M. ^{[1
]}

Gnesin, I. B. ^{[1
]}

Prokhorov, D. V. ^{[1
]}

Postnova, E. Yu. ^{[1
]}

Vnukov, V. I. ^{[1
]}

Zheltyakova, I. S. ^{[1
]}

Stroganova, T. S. ^{[1
]}

机构：

[1] Russian Acad Sci, Inst Solid State Phys, Chernogolovka, Moscow Oblast, Russia

来源：

RUSSIAN METALLURGY | 2023年 / 2023卷 / 09期

关键词：

carbides in low-alloy molybdenum alloys; electron microscopy of thin foils; cold rolling of thin molybdenum sheets; high-resolution scanning electron microscopy; crack and delamination formation; MECHANICAL-PROPERTIES; CRACK INITIATION; PARTICLES;

D O I：

10.1134/S0036029523090033

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

This experimental work briefly describes the technology of multiple electron-beam melting to produce low-alloy molybdenum alloys with other carbide-forming elements and carbon. Two new alloys described here allow deformation by cold rolling down to a thickness of 0.17 mm. When modifying the Golovin-Sims formula, we show that an alloy with fine (30-200 nm) carbides is hardened during cold rolling much more strongly than an alloy, in which only coarse (>= 1 mu m) carbides are present. The evolution of continuity defects with the deformation during cold rolling is traced.

引用

页码：1267 / 1275

页数：9

共 50 条

[31] Evolution of Goss texture in an Al–Cu–Mg alloy during cold rolling
Qi Zhao
Zhiyi Liu
Yangcheng Hu
Shasha Li
Song Bai
Archives of Civil and Mechanical Engineering, 20
[32] Deformation mechanisms and texture evolution in high entropy alloy during cold rolling
Kaushik, Lalit
Kim, Min-Seong
Singh, Jaiveer
Kang, Joo-Hee
Heo, Yoon-Uk
Suh, Jin-Yoo
Choi, Shi-Hoon
INTERNATIONAL JOURNAL OF PLASTICITY, 2021, 141
[33] Evolution of Microstructure and Mechanical Properties of a Biomedical β Titanium Alloy during Cold Rolling
Cui Wenfang
Jin Lei
Ma Yan
Liu Chunming
RARE METAL MATERIALS AND ENGINEERING, 2013, 42 (10) : 2034 - 2038
[34] Formation of Cold Cracks in Low-alloy Steels.
Pilous, Vaclav
Zvaranie Bratislava, 1981, 30 (09): : 263 - 266
[35] HYDROGEN INDUCED COLD CRACKING IN A LOW-ALLOY STEEL
SAVAGE, WF
NIPPES, EF
SZEKERES, ES
WELDING JOURNAL, 1976, 55 (09) : S276 - S283
[36] STRUCTURE AND PROPERTIES OF LOW-ALLOY STEELS AFTER CONTROLLED ROLLING
MATROSOV, YI
METAL SCIENCE AND HEAT TREATMENT, 1975, 17 (11-1) : 995 - 1004
[37] ROLLING OF HIGH-STRENGTH LOW-ALLOY SKELP AT IPSCO
HAMRE, EC
CIM BULLETIN, 1977, 70 (784): : 142 - 142
[38] AN INVESTIGATION OF THE TEXTURE OF LOW-ALLOY STEEL AFTER CONTROLLED ROLLING
POGORZHELSKIY, VI
CHISTYAKOV, YI
KHROMOV, VD
BORODKINA, MM
RUSSIAN METALLURGY, 1981, (05): : 75 - 77
[39] Texture and mechanical properties of low-alloy nickel alloys
Rodionov, DP
Gervas'eva, IV
Khlebnikova, YV
Sokolov, BK
PHYSICS OF METALS AND METALLOGRAPHY, 2002, 94 (06): : 581 - 589
[40] Texture and mechanical properties of low-alloy nickel alloys
Rodionov, D.P.
Gervas'eva, I.V.
Khlebnikova, Yu.V.
Sokolov, B.K.
Fizika Metallov i Metallovedenie, 2002, 94 (06): : 62 - 70

← 1 2 3 4 5 →