Synergistic Effects of In-Situ Exsolved Ni-Ru Bimetallic Catalyst on High-Performance and Durable Direct-Methane Solid Oxide Fuel Cells

被引:6
|
作者
Liu, Fan [1 ]
Deng, Hao [1 ]
Wang, Zixian [1 ]
Hussain, AbdulJabbar Mohammed [2 ]
Dale, Nilesh [2 ]
Furuya, Yoshihisa [2 ]
Miura, Yohei [3 ]
Fukuyama, Yosuke [3 ]
Ding, Hanping [4 ]
Liu, Bin [1 ]
Duan, Chuancheng [1 ]
机构
[1] Kansas State Univ, Dept Chem Engn, Manhattan, KS 66506 USA
[2] Nissan Tech Ctr North Amer NTCNA, Farmington Hills, MI 48331 USA
[3] Nissan Motor Co Ltd, Nissan Res Ctr, Yokosuka, Kanagawa 2378523, Japan
[4] Univ Oklahoma, Dept Aerosp & Mech Engn, Norman, OK 73019 USA
关键词
FINDING SADDLE-POINTS; ENERGY;
D O I
10.1021/jacs.3c12121
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
Direct-methane solid oxide fuel cells (CH4-SOFCs) have gained significant attention as methane, the primary component of natural gas (NG), is cheap and widely available and the natural gas infrastructures are relatively mature. However, at intermediate temperatures (e.g., 600-650 degrees C), current CH4-SOFCs suffer from low performance and poor durability under a low steam-to-carbon ratio (S/C ratio), which is ascribed to the Ni-based anode that is of low catalytic activity and prone to coking. Herein, with the guidance of density functional theory (DFT) studies, a highly active and coking tolerant steam methane reforming (SMR) catalyst, Sm-doped CeO2-supported Ni-Ru (SCNR), was developed. The synergy between Ni and Ru lowers the activation energy of the first C-H bond activation and promotes CHx decomposition. Additionally, Sm doping increases the oxygen vacancy concentration in CeO2, facilitating H2O adsorption and dissociation. The SCNR can therefore simultaneously activate both CH4 and H2O molecules while oxidizing the CH* and improving coking tolerance. We then applied SCNR as the CH4-SOFC anode catalytic reforming layer. A peak power density of 733 mW cm(-2) was achieved at 650 degrees C, representing a 55% improvement compared to that of pristine CH4-SOFCs (473 mW cm(-2)). Moreover, long-term durability testing, with >2000 h continuous operation, was performed under almost dry methane (5% H2O). These results highlight that CH4-SOFCs with a SCNR catalytic layer can convert NG to electricity with high efficiency and resilience.
引用
收藏
页码:4704 / 4715
页数:12
相关论文
共 50 条
  • [11] High-Performance Direct Ethanol Solid Oxide Fuel Cells
    Armstrong, Eric N.
    Park, Jae-Woo
    Minh, Nguyen Q.
    [J]. ELECTROCHEMICAL AND SOLID STATE LETTERS, 2012, 15 (05) : B75 - B77
  • [12] High-Performance Direct Ethanol Solid Oxide Fuel Cells
    Armstrong, Eric N.
    Park, Jae-Woo
    Minh, Nguyen Q.
    [J]. IONIC AND MIXED CONDUCTING CERAMICS 8, 2012, 45 (01): : 499 - 507
  • [13] Direct-methane solid oxide fuel cells with hierarchically porous Ni-based anode deposited with nanocatalyst layer
    Chen, Yu
    Zhang, Yanxiang
    Lin, Ye
    Yang, Zhibin
    Su, Dong
    Han, Minfang
    Chen, Fanglin
    [J]. NANO ENERGY, 2014, 10 : 1 - 9
  • [14] In-situ exsolved FeRu alloy nanoparticles on Ruddlesden-Popper oxides for direct hydrocarbon fuel solid oxide fuel cells
    Qin, Mingxia
    Tan, Ting
    Li, Kang
    Wang, Ziming
    Yang, Hongyu
    Liu, Zhijun
    Zhou, Mingyang
    Liu, Taikai
    Yang, Chenghao
    Liu, Min
    [J]. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2020, 45 (41) : 21464 - 21472
  • [15] Nanocomposite Catalyst for High-Performance and Durable Intermediate-Temperature Methane-Fueled Metal-Supported Solid Oxide Fuel Cells
    Liu, Fan
    Diercks, David
    Hussain, AbdulJabbar Mohammed
    Dale, Nilesh
    Furuya, Yoshihisa
    Miura, Yohei
    Fukuyama, Yosuke
    Duan, Chuancheng
    [J]. ACS APPLIED MATERIALS & INTERFACES, 2022, 14 (48) : 53840 - 53849
  • [16] Effect of the co-spun anode functional layer on the performance of the direct-methane microtubular solid oxide fuel cells
    Meng, Xiuxia
    Gong, Xun
    Yin, Yimei
    Yang, Naitao
    Tan, Xiaoyao
    Ma, Zi-Feng
    [J]. JOURNAL OF POWER SOURCES, 2014, 247 : 587 - 593
  • [17] In Situ Exsolved CoFeRu Alloy Decorated Perovskite as An Anode Catalyst Layer for High-Performance Direct-Ammonia Protonic Ceramic Fuel Cells
    Liang, Mingzhuang
    Song, Yufei
    Xiong, Baocheng
    Liu, Dongliang
    Xue, Daxiang
    Shen, Longyun
    Shi, Kanghua
    Song, Yixiao
    Li, Jingwei
    Niu, Qiang
    Xu, Meigui
    Ciucci, Francesco
    Zhou, Wei
    Shao, Zongping
    [J]. ADVANCED FUNCTIONAL MATERIALS, 2024,
  • [18] Enhance coking tolerance of high-performance direct carbon dioxide-methane solid oxide fuel cells with an additional internal reforming catalyst
    Li, Tian
    Yang, Yang
    Wang, Xinxin
    Zheng, Keqing
    Shen, Shuanglin
    Ou, Xuemei
    Lin, Bin
    Feng, Peizhong
    Wang, Shaorong
    Ling, Yihan
    [J]. JOURNAL OF POWER SOURCES, 2021, 512
  • [19] In situ formation of LaNi0.6Fe0.4O3-δ-carbon nanotube hybrids as anodes for direct-methane solid oxide fuel cells
    Luo, Ting
    Liu, Xuejiao
    Meng, Xie
    Wu, Hao
    Wang, Shaorong
    Zhan, Zhongliang
    [J]. JOURNAL OF POWER SOURCES, 2015, 299 : 472 - 479
  • [20] Direct, In Situ Optical Studies of Ni-YSZ Anodes in Solid Oxide Fuel Cells Operating with Methanol and Methane
    Eigenbrodt, Bryan C.
    Pomfret, Michael B.
    Steinhurst, Daniel A.
    Owrutsky, Jeffrey C.
    Walker, Robert A.
    [J]. JOURNAL OF PHYSICAL CHEMISTRY C, 2011, 115 (06): : 2895 - 2903