Investigations on Single Minerals and Synthetic Ash Components for the Enrichment of Copper from Waste Incineration Bottom Ashes by Flotation

Currently, MSWI (municipal solid waste incineration) ashes are predominantly landfilled, although they can have copper contents comparable to those of low-grade ores. Based on a previously published characterization of MSWI-BA, this paper presents investigations on the identification of potential collectors for copper recovery from MSWI-BA by flotation. The studies were conducted with single minerals (mainly copper oxide and sulfide) and synthetic slag components. Collector screening included thiourea-, thiophosphate-, and thiocarbamate-based collectors. In addition to commercial collector mixtures, pure ureas were also examined. At least one representative from each collector group was selected for the more in-depth studies: the thiourea S-n-dodecyle-iso-thiourea hydrochloride, the thiophosphate Danaflot 245, AERO 3473, and AERO MX-5160 as a mixture of a thiocarbamate and thiophosphates. Studies of the influence of collector concentration and pH were carried out with these. In addition, the contact angles of various metal oxides and the matrix composition with and without collector treatment were determined. Subsequently, flotation tests were carried out with mixtures of copper oxide and the individual matrix components (quartz, glass, cement, gypsum). AERO MX-5160 proved to be the most suitable collector, although alginic acid was added as a depressant due to a lack of selectivity towards gypsum.