Antipodal Linearly Tapered Slot Antenna with Quasi-Hemispherical Pattern Using Subwavelength Elements

Antennas with quasi-hemispherical radiation patterns are preferred in many wide-area wireless communication systems which require the signals to uniformly cover a wide two-dimensional region. In this work, a simple but effective beamwidth broadening technique based on an antipodal linearly tapered slot antenna (ALTSA) is first proposed and then experimentally verified. Compared with most of the reported designs, the proposed antenna can significantly widen beamwidth and achieve a quasi-hemispherical radiation pattern without increasing the overall size and structural complexity. Only two rows of subwavelength metallic elements (eight elements in total) are simply and skillfully printed at specified positions on the dielectric substrate (relative permittivity epsilon(r) = 2.94 and thickness h = 1.5 mm) of a general ALTSA whose peak gain is 11.7 dBi, approximately 200% half-power beamwidth (HPBW) enlargement can be obtained in all cut-planes containing the end-fire direction at the central frequency of 15 GHz, and the HPBW extensions in different cut-planes have good consistency. Thus, a quasi-hemispherical beam pattern can be acquired. Thanks to the simplicity of this method, the antenna size and structural complexity do not increase, resulting in the characteristics of easy fabrication and integration, being lightweight, and high reliability. This proposed method provides a good choice for wide-beam antenna design and will have a positive effect on the potential applications of wide-area wireless communication systems.