Experimental study on the effects of triangular groove inclination angles on the mechanical behavior of sand-concrete interfaces

The mechanical properties of pile-soil interfaces directly affect the bearing capacity of pile foundations. In this study, the effects of triangular groove inclination angles on the me-chanical properties of sand-concrete interfaces were investigated. Random rough concrete surfaces were obtained through slurry intrusion testing, and the roughness of concrete surfaces was evaluated based on the sand cone method. According to the roughness of random concrete surfaces, five regular concrete surfaces with different triangular groove inclination angles were constructed. A series of direct shear tests between (i) sand and random concrete surface, (ii) sand and regular concrete surface, as well as (iii) sand and smooth concrete surface were performed. Moreover, a direct shear test of natural sand was conducted. Lastly, a shear strength model considering the triangular groove inclination angle of sand-concrete interfaces was established, and the shear failure mechanism of interfaces was discussed. The results firstly indicated that the shear stress-displacement curves of random rough concrete surfaces were ideal elastic-plastic curves; and the reg-ular rough concrete surfaces were found to incur strain softening under a normal stress of 300 kPa. Secondly, the shear strength of sand-concrete interfaces increased with the in-crease in groove inclination angle of concrete interfaces. Thirdly, sand was found to ach-ieve the highest shear strength, while sand-smooth concrete interfaces proved to attain the lowest. Lastly, the internal friction angle value of random concrete interfaces was shown to range between the values of concrete surfaces with triangular groove inclination angles of 70 degrees and 90 degrees. (c) 2023 The Author(s). Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).