Influence of recycling waste hardened mortar and ceramic rubbish on the properties of flowable fill material

Fly ash (FA) cement and water make up flowable fill material, which is also generally produced from waste and utilized in place of compacted granular fill as a cost-effective fill or backfill material. The capability to produce mixtures from various inexpensive, locally available by-products is one of the main benefits of flowable fill material. To considerably reduce costs, this study designed flowable fill mixtures utilizing cement, recycled fine aggregate (RFA; recycling waste hardened mortar and ceramic rubbish), FA, superplasticizers (SPs), and water for various uses. Initially, FA, Portland cement, fine natural aggregate, and water were combined to create a control mixture. Recycled aggregate (recycling waste hardened mortar and ceramic rubbish) was used instead of normal aggregate in various mix proportions in weights of 10, 20, 30, 40, and 50%. They performed well and conformed to the requirements of flowable fill material concerning flow consistency, unit weight, compressive strength, direct tensile strength, and thermal conductivity. Finally, when compared to ordinary concrete, flowable fill material can be produced with minimal mechanical criteria, such as a compressive strength of fewer than 5.71 MPa after 60 days and a unit weight between 1,993 and 1,961 kg/m(3). Additionally, it was discovered that using more RFA to replace normal fine aggregate in flowable fill materials could result in a relative decrease in thermal conductivity.