Analysis of temperature regulation and heat storage effect of the combined phase change envelope in hot summer and cold winter zone

被引:6
|
作者
Li, Min [1 ]
Gong, Wenjun [1 ]
Liu, Shuai [1 ]
机构
[1] Southeast Univ, Jiangsu Key Lab Construction Mat, Nanjing 211189, Peoples R China
基金
中国国家自然科学基金;
关键词
Temperature regulation; Heat storage effect; The combined PCM envelope; Hot summer and cold winter zone;
D O I
10.1016/j.energy.2022.126518
中图分类号
O414.1 [热力学];
学科分类号
摘要
In order to study the character of heat storage and temperature regulation, a mathematical model of the thermal performance of an ideal passive energy storage building is established. Indoor thermal environment evaluation indexes of the passive buildings such as the temperature attenuation coefficient and supercooling degree/ superheating degree are proposed. The PCM (phase change materials) layer numbers, the total thickness and the thickness ratio of PCM layers of the combined PCM envelope are analyzed based on the simulation. The result shows that the combined envelope with two-layer PCM has better temperature regulation and heat storage effect. When the total thickness of the combined PCM envelope is 40 mm, and the thickness ratio of the PCM layer from the inside to the outside is13.3:26.7, the annual thermal comfort hours are the longest.
引用
收藏
页数:10
相关论文
共 50 条
  • [1] Applicability analysis of phase change material envelope in hot summer and cold winter area
    Kong, Fanhong (fhkong1980@163.com), 1600, Science Press (37):
  • [2] Experimental study on the optimum phase change temperature of phase change roofs in hot summer and cold winter areas
    Shi Y.
    Zhao Y.
    Fan Z.
    Jiang D.
    Huagong Jinzhan/Chemical Industry and Engineering Progress, 2023, 42 (09): : 4828 - 4836
  • [3] Economic Analysis of Surface Water Heat Pump in Heating Season in Hot Summer and Cold Winter Zone
    Liu, Ting-ting
    INTERNATIONAL CONFERENCE ON WATER RESOURCE AND ENVIRONMENTAL PROTECTION WREP 2014, 2014, : 35 - 39
  • [4] Analysis of the Applicability of a Phase-Change Energy Storage Wall for Public Buildings in Hot Summer and Cold Winter Climate Zones
    Hu, Haowei
    Zhang, Yubin
    Li, Qin
    Shui, Taotao
    He, Jing
    HEAT TRANSFER ENGINEERING, 2024,
  • [5] Sensitivity analysis of energy performance for high-rise residential envelope in hot summer and cold winter zone of China
    Yu, Jinghua
    Tian, Liwei
    Yang, Changzhi
    Xu, Xinhua
    Wang, Jinbo
    ENERGY AND BUILDINGS, 2013, 64 : 264 - 274
  • [6] ANALYSIS OF THE ECONOMICAL THICKNESS OF THERMAL INSULATION LAYER OF THE BUILDING ENVELOPE IN THE HOT-SUMMER AND COLD-WINTER ZONE
    Guo, Yonghui
    Zhang, Guoqiang
    Zhou, Jin
    Xie, Mingjing
    FIFTH INTERNATIONAL WORKSHOP ON ENERGY AND ENVIRONMENT OF RESIDENTIAL BUILDINGS AND THIRD INTERNATIONAL CONFERENCE ON BUILT ENVIRONMENT AND PUBLIC HEALTH, VOL I AND II, PROCEEDINGS, 2009, : 1455 - 1463
  • [7] Comparative Analysis of Natural and Stimulated Room Temperature of Residential Buildings in Hot Summer and Cold Winter Zone
    Ning, Yongfei
    Liu, Zehua
    Chen, Gang
    Zhang, Jie
    FRONTIERS OF GREEN BUILDING, MATERIALS AND CIVIL ENGINEERING, PTS 1-8, 2011, 71-78 : 547 - 551
  • [8] Effect of Building Orientation on Energy Consumption in Hot Summer and Cold Winter Zone
    Li, Tian
    Ni, Jiafei
    Zhang, Ke
    Yao, Jian
    2011 INTERNATIONAL CONFERENCE ON MACHINE INTELLIGENCE (ICMI 2011), PT 1, 2011, 3 : 252 - 255
  • [9] Low-energy envelope design of residential building in hot summer and cold winter zone in China
    Yu, Jinghua
    Yang, Changzhi
    Tian, Liwei
    ENERGY AND BUILDINGS, 2008, 40 (08) : 1536 - 1546
  • [10] Optimization method for prefabricated restroom envelope energy saving characteristics in hot summer and cold winter zone
    Zhang, Lirui
    Zhang, Hong
    Xu, Xu
    Dong, Ling
    ENERGY EXPLORATION & EXPLOITATION, 2021, 39 (03) : 944 - 961