Effect of Isothermal Treatment on Mechanical and Tribological Properties of Alloy Zn-40% Al-2% Cu-2% Si

被引：2
|
作者：
Savaskan, Temel [1 ]
Hekimoglu, Ali Pasa [2 ]
Azakli, Zeki [3 ]
机构：
[1] Halic Univ, Mech Engn Dept, Istanbul, Turkiye
[2] Recep Tayyip Erdogan Univ, Mech Engn Dept, Rize, Turkiye
[3] Gumushane Univ, Dept Mech Engn, Gumushane, Turkiye
来源：
METAL SCIENCE AND HEAT TREATMENT | 2023年 / 65卷 / 3-4期
关键词：
zinc alloys; isothermal treatment; microstructure; mechanical properties; wear; SLIDING WEAR PROPERTIES; ZN-40AL-2CU-2SI ALLOY; SILICON CONTENT; FRICTION; MICROSTRUCTURE; BEHAVIOR;
D O I：
10.1007/s11041-023-00922-1
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The effect of isothermal exposure at temperatures from 100 & DEG;C to 250 & DEG;C for 8 hours on the structure, mechanical and tribological properties of the Zn - 40% Al - 2% Cu - 2% Si alloy produced by chill casting is studied. The isothermal treatment eliminates dendritic segregation yielding a coarse-grained polyhedral structure containing an & alpha;-solid solution with fine inclusions of silicon and zinc-rich phase. Increase in the temperature of the isothermal exposure leads to decrease in the hardness and strength and increase in the ductility, in the coefficient of friction and in the wear magnitude while reducing the average roughness of the alloy surface.
引用
收藏
页码：254 / 261
页数：8
相关论文
共 50 条
  • [21] Effect of Al2O3 nanoparticles and strontium addition on structural, mechanical and tribological properties of Zn25Al3Si alloy
    Aleksandar Vencl
    Biljana Bobić
    Filip Vučetić
    Petr Svoboda
    Vladimir Popović
    Ilija Bobić
    Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2018, 40
  • [22] Effect of multi-directional hot forging on mechanical and tribological properties of Al-7Si-4Zn-3Cu alloy
    Alemdag, Yasin
    Karabiyik, Sadun
    Purcek, Gencaga
    JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, 2021, 36 (01): : 255 - 265
  • [23] Effect of Zr Addition and Aging Treatment on the Mechanical Performance of Al-2%Cu Base Alloys
    Samuel, E.
    Samuel, A. M.
    Samuel, F. H.
    Doty, H. W.
    TRANSACTIONS OF THE AMERICAN FOUNDRY SOCIETY, VOL 118, 2010, 118 : 77 - +
  • [24] Impact of the Structure on Mechanical and Tribological Properties of Sintered (Al–12 Si)–40 Sn Alloy
    Rusin N.M.
    Skorentsev A.L.
    Inorganic Materials: Applied Research, 2018, 9 (5) : 916 - 923
  • [25] Obtaning a new microstructure in the Zn-40 % at. Al-1. 5 % at. Cu alloy
    Aragon, J. A.
    Miranda, J. R.
    Garcia-Borquez, A.
    REVISTA MEXICANA DE FISICA, 2007, 53 (03) : 149 - 158
  • [26] The Effect of Al2Cu Precipitate Size on Microstructure and Mechanical Properties of Al-2 wt.%Cu Alloys Fabricated by ARB
    B. Azad
    E. Borhani
    Journal of Materials Engineering and Performance, 2015, 24 : 4789 - 4796
  • [27] The Effect of Al2Cu Precipitate Size on Microstructure and Mechanical Properties of Al-2 wt.%Cu Alloys Fabricated by ARB
    Azad, B.
    Borhani, E.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2015, 24 (12) : 4789 - 4796
  • [28] Investigation of the Effect of Heat Treatment on the Microstructures and Mechanical Properties of Al-13Si-5Cu-2Ni Alloy
    Wang, Zhi-Fa
    Miao, Tian-Jing
    Kou, Shu-Qing
    Zhang, Shuang
    Qiu, Feng
    METALS, 2021, 11 (05)
  • [29] Effect of Zn Addition on the Structural, Mechanical and Tribological Properties of Al12Si (EN AC 44100) Alloy
    Hekimoglu, Ali Pasa
    Sonmezisik, Ahsen
    Zimitoglu, Suha
    Haciosmanoglu, Murat
    Savaskan, Temel
    INTERNATIONAL JOURNAL OF METALCASTING, 2024,
  • [30] Anodic oxidation of an Al-2 wt% Cu alloy: effect of grain orientation
    Zhou, X
    Thompson, GE
    Skeldon, P
    Wood, GC
    Shimizu, K
    Habazaki, H
    CORROSION SCIENCE, 1999, 41 (06) : 1089 - 1094
12345