Effect of Isothermal Treatment on Mechanical and Tribological Properties of Alloy Zn-40% Al-2% Cu-2% Si

被引：2
|
作者：
Savaskan, Temel [1 ]
Hekimoglu, Ali Pasa [2 ]
Azakli, Zeki [3 ]
机构：
[1] Halic Univ, Mech Engn Dept, Istanbul, Turkiye
[2] Recep Tayyip Erdogan Univ, Mech Engn Dept, Rize, Turkiye
[3] Gumushane Univ, Dept Mech Engn, Gumushane, Turkiye
来源：
METAL SCIENCE AND HEAT TREATMENT | 2023年 / 65卷 / 3-4期
关键词：
zinc alloys; isothermal treatment; microstructure; mechanical properties; wear; SLIDING WEAR PROPERTIES; ZN-40AL-2CU-2SI ALLOY; SILICON CONTENT; FRICTION; MICROSTRUCTURE; BEHAVIOR;
D O I：
10.1007/s11041-023-00922-1
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The effect of isothermal exposure at temperatures from 100 & DEG;C to 250 & DEG;C for 8 hours on the structure, mechanical and tribological properties of the Zn - 40% Al - 2% Cu - 2% Si alloy produced by chill casting is studied. The isothermal treatment eliminates dendritic segregation yielding a coarse-grained polyhedral structure containing an & alpha;-solid solution with fine inclusions of silicon and zinc-rich phase. Increase in the temperature of the isothermal exposure leads to decrease in the hardness and strength and increase in the ductility, in the coefficient of friction and in the wear magnitude while reducing the average roughness of the alloy surface.
引用
收藏
页码：254 / 261
页数：8
相关论文
共 50 条
  • [1] Effect of Isothermal Treatment on Mechanical and Tribological Properties of Alloy Zn – 40% Al – 2% Cu – 2% Si
    Temel Savaşkan
    Ali Paşa Hekimoğlu
    Zeki Azaklı
    Metal Science and Heat Treatment, 2023, 65 : 254 - 261
  • [2] Effect of heat treatment on mechanical and wear properties of Zn-40Al-2Cu-2Si alloy
    Savaskan, Temel
    Azakli, Zeki
    Hekimoglu, Ali Pasa
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2021, 31 (09) : 2651 - 2663
  • [3] Effect of Strontium on the Microstructure, Mechanical, and Tribological Properties of the Zn-40Al-2Cu Alloy
    Haciosmanoglu, Murat
    Tellioglu, Murat
    Hekimoglu, Ali Pasa
    INTERNATIONAL JOURNAL OF METALCASTING, 2023, 17 (04) : 3133 - 3142
  • [4] Effect of Strontium on the Microstructure, Mechanical, and Tribological Properties of the Zn–40Al–2Cu Alloy
    Murat Hacıosmanoğlu
    Murat Tellioğlu
    Ali Paşa Hekimoğlu
    International Journal of Metalcasting, 2023, 17 : 3133 - 3142
  • [5] Effect of equal-channel angular extrusion on the mechanical and tribological properties of as-cast Zn-40Al-2Cu-2Si alloy
    Purcek, G.
    Saray, O.
    Kucukomeroglu, T.
    Haouaoui, M.
    Karaman, I.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (15): : 3480 - 3488
  • [6] Effects of Mn content on the tribological behaviors of Zn-27% Al-2% Cu alloy
    Li, YY
    Ngai, TL
    Xia, W
    Zhang, W
    WEAR, 1996, 198 (1-2) : 129 - 135
  • [7] Effect of Multi Directional Forging on the Microstructure and Mechanical Properties of Zn-24 wt% Al-2 wt% Cu Alloy
    Sharath, P. C.
    Udupa, K. Rajendra
    Kumar, G. V. Preetham
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2017, 70 (01) : 89 - 96
  • [8] Effect of Multi Directional Forging on the Microstructure and Mechanical Properties of Zn-24 wt% Al-2 wt% Cu Alloy
    P. C. Sharath
    K. Rajendra Udupa
    G. V. Preetham Kumar
    Transactions of the Indian Institute of Metals, 2017, 70 : 89 - 96
  • [9] Mechanical and tribological properties of Al-40Zn-Cu alloys
    Alemdag, Yasin
    Savaskan, Temel
    TRIBOLOGY INTERNATIONAL, 2009, 42 (01) : 176 - 182
  • [10] Effect of Iron and Silicon on the Phase Composition and Microstructure of the Al-2% Cu-2% Mn (wt %) Cold Rolled Alloy
    Belov, N. A.
    Cherkasov, S. O.
    Korotkova, N. O.
    Yakovleva, A. O.
    Tsydenov, K. A.
    PHYSICS OF METALS AND METALLOGRAPHY, 2021, 122 (11): : 1095 - 1102
12345