Extraordinary strength and ductility of cold-rolled 304L stainless steel at cryogenic temperature

In present work, tensile behaviors of cold-rolled 304L stainless steel were investigated at both room temperature (RT) and liquid nitrogen temperature (LNT). After cold-rolling with a thickness reduction of similar to 92%, the 304L stainless steel exhibits an ultrahigh yield strength of 1787 MPa at the expense of ductility (1.06% of uniform elongation) at RT. At LNT, the yield strength (upper yield point of sigma(yu) = 2308.4 MPa and lower yield point of sigma(yl) = 1894.2 MPa) and uniform elongation (23%) increase greatly. Detailed microstructural investigation reveals that the cold-rolled 304L stainless steel comprises mainly of deformation induced martensite and high density of dislocations (9.06 x10(14) m(-2)), leading to a lack of dislocation storage capacity and thus brittle fracture at RT. While interrupt tests at LNT reveal a first increase and then decline in dislocation density with tensile strain, accompanied with phase transformation from austenite to martensite. The delamination events also occur, characterized by the multiple separated laminated ligaments observed at fracture surface. Therefore, the high dense dislocations and transformation-induced plasticity (TRIP) effect as well as delamination toughening mechanism contributes to the excellent combination of strength and ductility at LNT. Our work provides experimental and microstructural insights into the deformation mechanisms of the similar to 92%-cold-rolled 304L stainless steel during tensile deformation at RT and LNT. (C) 2023 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).