Upset Forging Temperature Effect on Structure and Tribological Properties of Sintered Al-7Fe-38Sn Alloy

被引：0
|
作者：
Rusin, N. M. [1 ]
Skorentsev, A. L. [1 ]
Likharev, V. E. [1 ]
机构：
[1] Russian Acad Sci, Inst Strength Phys & Mat Sci, Siberian Branch, Tomsk, Russia
来源：
RUSSIAN PHYSICS JOURNAL | 2024年 / 67卷 / 01期
基金：
俄罗斯科学基金会;
关键词：
hybrid composite material; sintering; upset forging; structure; tribological properties; WEAR PROPERTIES; TIN; BEHAVIOR;
D O I：
10.1007/s11182-024-03082-8
中图分类号：
O4 [物理学];
学科分类号：
0702 ;
摘要：
The paper focuses on upset forging of the sintered Al-7Fe-38Sn alloy in a closed mold and the process temperature, both affecting its structure and tribological properties. The Al-7Fe-38Sn composite consists of the hard (Al3Fe) and soft (Sn) phases in 17 and 20 volume fractions, respectively. It is found that <= 250 degrees forging has a negative effect on the composite plasticity, whereas at 300 degrees C, the plasticity restores and even grows after multiple compression. Tensile strength of the composite remains stable and is similar to 130 MPa. It is found that Al3Fe phase particles intensively dissolve during heating up to the forging temperature in the presence of liquid tin.
引用
收藏
页码：9 / 16
页数：8
相关论文
共 50 条
  • [31] Effect of Temperature on the Structure and Mechanical Properties of Zr–2.5% Nb Alloy Processed by Rotary Forging
    S. O. Rogachev
    V. A. Andreev
    A. S. Kuznetsova
    M. V. Gorshenkov
    D. V. Ten
    S. A. Bondareva
    M. A. Kaplan
    A. S. Baikin
    T. A. Sviridova
    Transactions of the Indian Institute of Metals, 2024, 77 : 1141 - 1150
  • [32] Effect of ECAE on microstructure and tribological properties of Cu-10%Al-4%Fe alloy
    Gao, L. L.
    Cheng, X. H.
    TRIBOLOGY LETTERS, 2007, 27 (02) : 221 - 225
  • [33] Effect of homogenization temperature on the microstructure and mechanical properties of extruded Mg-7Sn-1Al-1Zn alloy
    Park, Sung Hyuk
    You, Bong Sun
    JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 637 : 332 - 338
  • [34] Effect of Melting Process on the Microstructure and Mechanical Properties of Fe–7 wt% Al Alloy
    Shivkumar Khaple
    R. G. Baligidad
    Transactions of the Indian Institute of Metals, 2012, 65 : 57 - 61
  • [35] Effect of Cu-15Sn on the microstructure and mechanical properties of pressureless sintered Fe-Co-Cu alloy
    Chen, Yuhui
    Tao, Hongliang
    Zhou, Haojun
    Li, Yimin
    Yin, Yuhang
    Luo, Fenghua
    JOURNAL OF ALLOYS AND COMPOUNDS, 2023, 939
  • [36] Effect of Heat Treatment Temperature on the Spinning Structure and Properties of a Cu-Sn Alloy
    Liu, Jinli
    Zheng, Wenyuan
    Yin, Huiqin
    MICROSCOPY AND MICROANALYSIS, 2020, 26 (01) : 29 - 35
  • [37] Effect of Vacuum Hot Pressing Temperature on the Mechanical and Tribological Properties of the Fe–Cu–Ni–Sn–VN Composites
    V. A. Mechnik
    N. A. Bondarenko
    V. M. Kolodnitskyi
    V. I. Zakiev
    I. M. Zakiev
    S.R. Ignatovich
    S. N. Dub
    N. O. Kuzin
    Powder Metallurgy and Metal Ceramics, 2020, 58 : 679 - 691
  • [38] The Effect of Oxygen Partial Pressure on Microstructure and Properties of Fe40Al Alloy Sintered under Vacuum
    Siemiaszko, Dariusz
    Kowalska, Beata
    Jozwik, Pawel
    Kwiatkowska, Monika
    MATERIALS, 2015, 8 (04): : 1513 - 1525
  • [39] Seebeck effect of Fe-Al-Si alloy and low temperature thermoelectric properties
    Shohda, M
    Kado, M
    Tsuji, T
    Suzuki, RO
    Ono, K
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1998, 84 (02): : 154 - 158
  • [40] EFFECT OF QUENCHING WATER TEMPERATURE ON THE MECHANICAL PROPERTIES AND STRUCTURE OF FORGING OF ALLOY V93pch.
    Tkachenko, E.A.
    Sandler, V.S.
    Zhegina, I.P.
    Metal Science and Heat Treatment (English Translation of Metallovedenie i Termicheskaya Obrabotka Metallov), 1980, 22 (1-2): : 147 - 150
12345