Performance-based plastic design and seismic fragility assessment for chevron braced steel frames considering aftershock effects

Observations from past earthquakes demonstrated that buildings in high seismic regions might be exposed to several aftershocks following the mainshock which can significantly increase the damage level. Since aftershocks have the potential to increase the vulnerability of buildings damaged under mainshocks, it is crucial to consider aftershock effects in the structural design phase. Performance-based Plastic Design (PBPD) method is an innovative seismic design method in which the building designed by this method shows a desirable performance under severe ground motions. PBPD allows the designer to avoid time-consuming trial and error process of analyses that are usually done in Performance-based Design method to reach a desirable performance. However, this efficient method is only valid for mainshocks only and does not consider aftershock effects in the structural design process. In this study, initially, the seismic performance (interstory drift and plastic hinges distribution) of the three 3-, 6-, and 9- story PBPD designed Chevron-braced Steel frames (CBSF) are compared under mainshocks (MS) and mainshock-aftershock (MS-AS) sequences. Subsequently, a PBPD method is developed for CBSFs considering the aftershock effects in the structural design process. Incremental dynamic analysis (IDA) has been performed using a suite of mainshocks and aftershock ground motions to develop a design base shear modification factor. Using the developed method, the performance of CBSFs under MS and MS-AS sequences is evaluated and compared with the existing PBPD method. Fragility curves are developed to compare the seismic vulnerability of the frames designed based on PBPD and proposed PBPD methods under MS-AS sequences. The outcomes of this study provide a practical design approach for CBSFs under MS-AS sequences and shows that the structures designed using developed PBPD method show more desirable behavior under MS-AS sequences compared with the structures designed using the conventional PBPD method.