Optimization of the Fabrication of Sustainable Ceramsite Adsorbent from Coal Fly Ash/Waterworks Sludge/Waste Glass for Decolorization of Malachite Green

As a traditional dye, malachite green (MG) poses a threat to our environment and health. To decolorize MG, a composite ceramsite adsorbent composed of coal fly ash (CFA), sewage treatment sludge (STS), and waste glass (WG) with a quality ratio of 3:3:4, respectively, was prepared. The optimal preparation parameters were determined as follows: preheating temperature = 600(degrees)C, sintering temperature = 1157(degrees)C, and sintering time = 17 min. Under optimal conditions, scanning electron microscopy (SEM) images show that the X-Com-ceramsite sample exhibits rough features and a porous structure. The obtained X-Com-ceramsite has a good MG decolorization effect (92% decolorization rate with an initial MG concentration of 56.876 mg/L). The qmax value of MG can reach up to 37.6 mg/g. The retention degree of MG in the X-Com-ceramsite with a relatively higher pH is stronger, and the adsorption process is spontaneous and endothermic. Synchronous fluorescence, two-dimensional correlation spectroscopy (2D-COS), and Fourier transform infrared spectroscopy (FT-IR) proved that the sensitivity of the C-O/C-O-O functional groups of the carbohydrates on the surface of the X-Comceramsite has a higher binding affinity toward MG as the initial concentration of MG changes.