共 23 条
Charge storage kinetics of interconnected MnO2 nano-needles/reduced graphene oxide composite for high energy density quasi-solid-state sodium ion asymmetric supercapacitor
被引:8
|作者:
Jhankal, Deependra
[1
]
Khan, Mohammad Saquib
[2
]
Shakya, Preeti
[2
]
Bhardwaj, Nikita
[1
]
Yadav, Bhanu
[1
]
Jhankal, K. K.
[3
]
Sachdev, K.
[1
,2
]
机构:
[1] Malaviya Natl Inst Technol, Dept Phys, Jaipur 302017, India
[2] Malaviya Natl Inst Technol, Mat Res Ctr, Jaipur 302017, India
[3] Univ Rajasthan, Dept Chem, Jaipur 302004, India
来源:
关键词:
MANGANESE OXIDE;
ELECTRODE MATERIAL;
PERFORMANCE;
CARBON;
FABRICATION;
NANOSHEETS;
NANOPARTICLES;
REDUCTION;
DIOXIDES;
CATHODE;
D O I:
10.1039/d3ya00469d
中图分类号:
O64 [物理化学(理论化学)、化学物理学];
学科分类号:
070304 ;
081704 ;
摘要:
In this study, a facile synthesis route for preparing manganese dioxide (MnO2) with unique nano-needle morphology and its nanocomposite with reduced graphene oxide (MnO2-rGO) for high energy density quasi-solid-state asymmetric supercapacitor (ASC) application is reported. Morphological characterizations indicate that the MnO2 nano-needles are uniformly decorated on rGO sheets, creating an interconnected structure with rGO. The MnO2-rGO nanocomposite shows good pseudocapacitive electrochemical behavior in a potential domain from 0 to 1.0 V. The detailed analysis of the cyclic voltammetry (CV) profiles of the rGO and MnO2-rGO electrodes indicate that their sodium ion storage kinetics are based on ideal capacitive-controlled and pseudocapacitive (capacitive and diffusive) controlled processes, respectively. Furthermore, a quasi-solid-state ASC device is constructed by employing the MnO2-rGO nanocomposite and rGO as the positive and negative electrodes, respectively. The fabricated ASC (rGO & Vert;MnO2-rGO) device operates within the wide cell potential range from 0 to 1.8 V and possesses the highest capacitance of 216 F g(-1), at the current density of 1 A g(-1), which is superior to that of the recently reported literatures. The ASC (rGO & Vert;MnO2-rGO) device displays an energy density of 24.25 W h kg(-1) at corresponding power density of 900 W kg(-1) along with significant cycle stability over the 6000 cycles. Thus, the morphological design of an advanced electrode material to boost the capacitance and potential window with the polymer gel electrolyte will aid in the fabrication of high energy density storage devices.
引用
收藏
页码:191 / 202
页数:12
相关论文