KINEMATICS SIMULATION OF TEMPERATURE MEASURING ROBOT FOR STEELMAKING FURNACE

被引：0

作者：

Zhou, J. R. ^{[1
]}

Cai, Y. Q. ^{[1
]}

Liu, X. ^{[1
]}

机构：

[1] North China Univ Sci & Technol, Coll Mech Engn, Tangshan, Hebei, Peoples R China

来源：

METALURGIJA | 2024年 / 63卷 / 01期

关键词：

steelmaking; furnace; mechanical arm; kinematic analysis; trajectory planning;

D O I：

暂无

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Aiming at the temperature measurement in the refining process, a temperature measurement robot that can go deep into the furnace for temperature measurement is designed. Based on the D-H parameter modeling method, the kinematics of the manipulator is modeled, and the forward and inverse kinematics of the manipulator are solved. The workspace of the manipulator is simulated by Monte Carlo method on MATLAB, and the joint trajectory of the manipulator is planned by using Robotics Toolbox. The angular displacement, angular velocity and angular acceleration curves of each joint are obtained through simulation. The simulation results show that the manipulator runs smoothly and continuously, meeting the requirements of kinematics.

引用

页码：9 / 12

页数：4

共 50 条

[21] STEELMAKING OUTSIDE PRIMARY FURNACE
WESTER, JA
JERNKONTORETS ANNALER, 1972, 156 (03): : 93 - &
[22] ROLE OF ARC FURNACE IN STEELMAKING
MARSHALL, DF
REFRACTORIES JOURNAL, 1970, : 16 - &
[23] Electric furnace steelmaking section
Stomakhin, A.Ya.
Shuiyun Gongcheng/Port & Waterway Engineering, 1998, (11): : 15 - 17
[24] Energy optimizing furnace for steelmaking
Wang, Dazhou, 1600, (28):
[25] Simulation and Application of Bottom-Blowing in Electrical Arc Furnace Steelmaking Process
Liu, Fuhai
Zhu, Rong
Dong, Kai
Bao, Xiang
Fan, Shiliang
ISIJ INTERNATIONAL, 2015, 55 (11) : 2365 - 2373
[26] Simulation of a DC electric arc furnace for steelmaking: Study in the arc and bath regions
Simulación de un horno eléctrico de arco CC para aceración: Estudio de la región del arco y del baño metálico
Argáez, M.A.R. (mramirez@alum.mit.edu), 2001, Centro Nacional de Investigaciones Metalurgicas (37):
[27] Electric furnace steelmaking section
Stomakhin, A.Ya.
Stal', 2001, (01): : 21 - 23
[28] REFRACTORIES FOR STEELMAKING OUTSIDE FURNACE
PARTRIDG.TJ
REFRACTORIES JOURNAL, 1971, (JUL): : 21 - &
[29] METHOD OF MEASURING TARGET TEMPERATURE IN SOLAR FURNACE
KAMADA, O
APPLIED OPTICS, 1964, 3 (12): : 1397 - &
[30] Kinematics analysis and simulation study of an archwire bending robot
Zhang, Yongde
Jiang, Jixiong
Gaojishu Tongxin/Chinese High Technology Letters, 2012, 22 (07): : 727 - 734

← 1 2 3 4 5 →