Effects of temperature and humidity ratio on the performance of desiccant dehumidification system under low-temperature regeneration

被引:6
|
作者
Yu, Hao [1 ]
Seo, Sang Won [1 ]
Miksik, Frantisek [2 ]
Thu, Kyaw [1 ,2 ]
Miyazaki, Takahiko [1 ,2 ]
Ng, Kim Choon [3 ]
机构
[1] Kyushu Univ, Interdisciplinary Grad Sch Engn Sci, Dept Energy & Environm Engn, Kasuga Koen 6-1, Kasuga, Fukuoka 8168580, Japan
[2] Kyushu Univ, Int Inst Carbon Neutral Energy Res I2CNER, Res Ctr Next Generat Refrigerant Properties NEXT, Nishi Ku, 744 Motooka, Fukuoka 8190395, Japan
[3] King Abdullah Univ Sci & Technol KAUST, Water Desalinat & Reuse Ctr WDRC, Thuwal 239556900, Saudi Arabia
关键词
Adsorption; Dehumidification; Desiccant; Low-temperature regeneration; Performance analysis; WATER-VAPOR; LIQUID DESICCANT; COOLING SYSTEM; SODIUM-SALT; SILICA-GEL; WASTE HEAT; ADSORPTION; ENERGY; ENVIRONMENT; SORBENTS;
D O I
10.1007/s10973-022-11368-7
中图分类号
O414.1 [热力学];
学科分类号
摘要
The desiccant dehumidification system can separate the latent heat and sensible heat in the air-conditioning system and achieve energy savings by removing latent heat. Industrial waste heat and renewable energy could be utilized in desiccant dehumidification systems, where the desorption process can be performed below 70 degrees C. The vapor pressure and temperature of the regenerating air dictate the desorption process corresponding to the isotherm properties. This study has focused on the effects of various temperatures and humidity ratios of regeneration air on the performance of a desiccant dehumidifier using a polymer as an adsorbent. Experiments were performed using the regeneration air with the humidity ratios of 0.005 kg kg(-1), 0.010 kg kg(-1), 0.015 kg kg(-1), and 0.020 kg kg(-1), while the air temperatures were varied from 40 degrees C to 70 degrees C. The evaluation of this study employs the adsorption/desorption amount, average moisture removal capacity, and latent energy ratio (LER) of the regeneration process as key performance indexes. At the regeneration temperature of 68 degrees C, the peak desorption amount at the humidity ratio of 0.005 kg kg(-1) and 0.010 kg kg(-1) both reached 0.011 kg kg(-1). The results indicated that the higher desorption temperature led to a higher desorption amount. Besides, with the increased desorption temperature, the average moisture removal capacity increases. In contrast, the high humidity ratio of regeneration air resulted in a weak dehumidification ability. Lower regeneration temperature was difficult to apply to regenerate the polymer-based desiccant under a high-humidity-ratio atmosphere. To attain a high LER, a lower humidity ratio of dry air and regeneration temperature was preferred. The regeneration air with a humidity ratio of 0.020 kg kg(-1) is not suitable to apply in the dehumidification system in the temperature range of 40-70 degrees C.
引用
收藏
页码:3045 / 3058
页数:14
相关论文
共 50 条
  • [1] Effects of temperature and humidity ratio on the performance of desiccant dehumidification system under low-temperature regeneration
    Hao Yu
    Sang won Seo
    František Mikšík
    Kyaw Thu
    Takahiko Miyazaki
    Kim Choon Ng
    Journal of Thermal Analysis and Calorimetry, 2023, 148 : 3045 - 3058
  • [2] Desiccant Dehumidification System for Low Desorption Temperature
    Yaningsih, Indri
    Wijayanta, Agung Tri
    Miyazaki, Takahiko
    Koyama, Shigeru
    4TH INTERNATIONAL CONFERENCE ON INDUSTRIAL, MECHANICAL, ELECTRICAL, AND CHEMICAL ENGINEERING, 2019, 2097
  • [3] Optimization of desiccant wheel speed and area ratio of regeneration to dehumidification as a function of regeneration temperature
    Chung, Jae Dong
    Lee, Dae-Young
    Yoon, Seok Mann
    SOLAR ENERGY, 2009, 83 (05) : 625 - 635
  • [4] Heat and Mass Transfer Characteristics of a Desiccant Dehumidification System Operating by Low Regeneration Temperature
    Yaningsih, Indri
    Wijayanta, Agung Tri
    Miyazaki, Takahiko
    HEAT TRANSFER ENGINEERING, 2022, 43 (19) : 1639 - 1651
  • [5] Dehumidification at high temperature and high humidity by low-temperature regenerative polymers
    Wakita, Hidenobu
    Okumura, Yasuaki
    CHEMICAL COMMUNICATIONS, 2022, 58 (20) : 3346 - 3349
  • [6] A novel liquid desiccant dehumidification system driven by low-temperature heat for industrial application
    Su, Bosheng
    Han, Wei
    Sui, Jun
    Jin, Hongguang
    8TH INTERNATIONAL CONFERENCE ON APPLIED ENERGY (ICAE2016), 2017, 105 : 1953 - 1959
  • [7] Improvement of Dehumidification Performance of Desiccant Rotors Regenerated at a Low Temperature
    Kuroda, Masao
    Kimura, Kazuya
    Komori, Masahito
    HEAT TRANSFER ENGINEERING, 2016, 37 (7-8) : 650 - 658
  • [8] A novel design of a rotary desiccant system for reduced dehumidification regeneration air temperature
    O'Connor, Dominic
    Calautit, John Kaiser
    Hughes, Ben Richard
    PROCEEDINGS OF THE 9TH INTERNATIONAL CONFERENCE ON APPLIED ENERGY, 2017, 142 : 253 - 258
  • [9] Feasibility of a two-stage liquid desiccant dehumidification system driven by low-temperature heat and power
    Su, Bosheng
    Han, Wei
    Sui, Jun
    Jin, Hongguang
    APPLIED THERMAL ENGINEERING, 2018, 128 : 795 - 804
  • [10] A two-stage liquid desiccant dehumidification system by the cascade utilization of low-temperature heat for industrial applications
    Su, Bosheng
    Han, Wei
    Sui, Jun
    Jin, Hongguang
    APPLIED ENERGY, 2017, 207 : 643 - 653