Improved tensile properties of Al2O3/Al composite with in-situ generated Al2O3

被引：2
|
作者：
Shi, Wenchao [1 ]
Cui, Beishun [1 ]
Tang, Min [1 ]
Gong, Dongmei [2 ]
Xu, Feng [2 ]
机构：
[1] Hefei Univ Technol, Hefei 230009, Peoples R China
[2] West Anhui Univ, Liuan 237012, Anhui, Peoples R China
来源：
MATERIALS TESTING | 2024年 / 66卷 / 03期
基金：
安徽省自然科学基金;
关键词：
aluminum matrix composite; in situ; tensile property; reinforcement; ball milling;
D O I：
10.1515/mt-2023-0311
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
In order to obtain a Al2O3/Al composite with high strength, the Al2O3 generated in situ is served as reinforcement. The ball milling is used to flake pure Al powders. The Al2O3/Al composite with flaked Al powders is obtained by vacuum hot pressing sintering. The effect of the flaked Al powders on the distribution of Al2O3 generated in situ is studied. The hardness and tensile properties of Al2O3/Al composite are studied. The results show that the dehydration temperatures of boric acid in powder mixtures with the flaked Al powders and with the spherical Al powders are 119 degrees C and 128 degrees C, respectively. During sintering stage, the Al2O3 is generated in situ. Compared with the Al2O3/Al composites with the spherical Al powders, more Al2O3 are generated in Al2O3/Al composites with the flaked Al powders. The hardness and ultimate tensile strength of Al2O3/Al composite are higher than those of pure Al alloy.
引用
下载
收藏
页码：359 / 363
页数：5
相关论文
共 50 条
  • [31] Consolidation of mechanically milled Al/Al2O3 and Al-8Zn/Al2O3 composite powders
    Department of Metallurgical Engineering, IPN-ESIQIE, Apdo. Postal 118-392, 07738 México D. F., Mexico
    Rev. Adv. Mater. Sci., 2008, 3 (297-300):
  • [32] Preparation and properties of Al2O3/Fe3Al composite
    Yin, Yansheng
    Gong, Hongyu
    Li, Jia
    Zhang, Jingde
    Hao, Chuncheng
    Kuei Suan Jen Hsueh Pao/ Journal of the Chinese Ceramic Society, 2003, 31 (08): : 721 - 726
  • [33] Consolidation of mechanically milled Al/Al2O3 and Al-8Zn/Al2O3 composite powders
    Hernandez-Silva, D.
    Gamez-Huerta, J.
    Garcia-Bernal, M. A.
    Sauce-Rangel, V.
    REVIEWS ON ADVANCED MATERIALS SCIENCE, 2008, 18 (03) : 297 - 300
  • [34] Damping behavior of Al2O3/Al composite
    Zhang, Xiaonong
    Zhang, Di
    Wa, Renjie
    Cailiao Kexue yu Gongyi/Material Science and Technology, 5 (03): : 55 - 57
  • [35] Influence of in-situ Al2O3 content on mechanical properties of Al2O3 reinforced Fe-Cr-Ni alloys
    Chen, Chang
    Shi, Sitao
    Guo, Zheng
    Li, Guoxin
    Wu, Yonghua
    Su, Mingzhou
    Wang, Huimeng
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2019, 110 (06) : 577 - 581
  • [36] TENSILE BEHAVIOR OF AL2O3/FEAL+B AND AL2O3/FECRALY COMPOSITES
    DRAPER, SL
    AIKIN, BJM
    ELDRIDGE, JI
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1995, 26 (10): : 2719 - 2731
  • [37] In-situ formed γ-Al2O3 nanocrystals repaired and toughened Al2O3 coating prepared by plasma spraying
    Yang, Kai
    Feng, Jingwei
    Zhou, Xiaming
    Tao, Shunyan
    SURFACE & COATINGS TECHNOLOGY, 2012, 206 (13): : 3082 - 3087
  • [38] RF GENERATED PLASMA SINTERING OF AL2O3 AND MGO-DOPED AL2O3
    KIM, JS
    JOHNSON, DL
    AMERICAN CERAMIC SOCIETY BULLETIN, 1981, 60 (03): : 378 - 378
  • [39] Boron Emitter Passivation With Al2O3 and Al2O3/SiNx Stacks Using ALD Al2O3
    Richter, Armin
    Benick, Jan
    Hermle, Martin
    IEEE JOURNAL OF PHOTOVOLTAICS, 2013, 3 (01): : 236 - 245
  • [40] Oxidation of volatile organic compounds on Al2O3, Pd/Al2O3, and PdO/Al2O3 catalysts
    Cordi, EM
    Falconer, JL
    JOURNAL OF CATALYSIS, 1996, 162 (01) : 104 - 117
12345