Study of noise and structural characteristics of twin-screw air compressor based on multi-physical field coupling

被引:2
|
作者
He, Yayin [1 ]
Xiao, Congcong [1 ]
Zhang, Wei [1 ]
Wang, Kai [1 ]
机构
[1] Shaanxi Univ Technol, Sch Mech Engn, Hanzhong 723000, Shaanxi, Peoples R China
关键词
D O I
10.1038/s41598-023-48362-4
中图分类号
O [数理科学和化学]; P [天文学、地球科学]; Q [生物科学]; N [自然科学总论];
学科分类号
07 ; 0710 ; 09 ;
摘要
For the problems of high noise and low efficiency of twin-screw air compressor, the mutual coupling effect of noise and structure for the twin-screw air compressor is studied by using acoustic-solid coupling technology. The simulation model of acoustic-structural coupling of twin-screw air compressor is established. Combining acoustic wave theory calculation with structural characteristics, the sound pressure level distribution and structural deformation law of different tangent planes of the shell at different frequencies under external excitation are studied. The results show that when the frequency is different, the more intensive the acceleration distribution on the shell surface is, the greater the sound pressure level is. At the same frequency, as the incident pressure wave increases, the deformation on the shell also increases, and the maximum shell deformation and the maximum sound pressure level both appear around 2000 Hz. As the frequency increases, the acceleration distribution on the surface of the shell becomes more denser and the sound pressure level becomes larger.
引用
收藏
页数:12
相关论文
共 50 条
  • [21] A study on the uniformity of hot air drying quality for stacked flake materials based on multi-physical coupling fields
    Jiang, Wei
    Wang, Lihua
    Yin, Yanchao
    Zhang, Hao
    Zhao, Zemin
    Zong, Yangyang
    Yang, Xiong
    Wei, Qike
    Wang, Huaiyu
    DRYING TECHNOLOGY, 2024, 42 (11) : 1744 - 1756
  • [22] Study on multi-physical field characteristics of electrostatic precipitator with different collecting electrodes
    Zhou, Wenning
    Jiang, Renbao
    Sun, Yifan
    Chen, Bing
    Liu, Baiqian
    POWDER TECHNOLOGY, 2021, 381 : 412 - 420
  • [23] Thermoelastic vibration analysis of disc brake based on multi-physical field coupling method
    Zhang, Sen
    Zhang, Jian
    JOURNAL OF VIBROENGINEERING, 2020, 22 (01) : 1 - 15
  • [24] Simulation of microwave heating reactor for hydrofluoric acid based on multi-physical field coupling
    Liu, Jiuqing
    Li, Yan
    Chen, Zehao
    He, Junying
    Tang, Jianjun
    APPLIED THERMAL ENGINEERING, 2025, 262
  • [25] Dynamic response prediction of a twin-screw compressor with gas-induced cyclic loads based on multi-body dynamics
    Wu, Yu-Ren
    Van-The Tran
    INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, 2016, 65 : 111 - 128
  • [26] Experimental study of noise and vibration reduction in a medium-size oil-flooded twin-screw compressor by the application of helix relief
    Matsuo, K.
    Holmes, C. S.
    8TH INTERNATIONAL CONFERENCE ON COMPRESSORS AND THEIR SYSTEMS, 2013, : 363 - 371
  • [27] Influence of the Electromagnetic Characteristics in Air Region on High-Speed Permanent Magnet Generator Based on Multi-Physical Field
    Yang, Cunxiang
    Zhu, Zhihao
    Yi, Ran
    Qiu, Hongbo
    IEEJ TRANSACTIONS ON ELECTRICAL AND ELECTRONIC ENGINEERING, 2023, 18 (08) : 1342 - 1351
  • [28] The Optimization Design of Sound Arrester for the Dry Type Air Core Smoothing Reactor Based on the Multi-Physical Field Coupling Method
    Yuan, Fating
    Yang, Shouwei
    Qin, Shihong
    Tang, Bo
    Lv, Kai
    Han, Shanshan
    Ding, Can
    Huang, Li
    IEEJ TRANSACTIONS ON ELECTRICAL AND ELECTRONIC ENGINEERING, 2021, 16 (05) : 715 - 721
  • [29] Operating Characteristics of Alkaline Water Electrolyzer Based on Multi-physical Field Coupled Modeling
    Wang, Rundong
    Li, Jinghua
    Wei, Shanyang
    Gaodianya Jishu/High Voltage Engineering, 2024, 50 (07): : 3209 - 3220
  • [30] A RANS-based study of the impact of rudder on the propeller characteristics for a twin-screw ship during maneuvers
    Guo, Hai-Peng
    Zou, Zao-Jian
    OCEAN ENGINEERING, 2021, 239